Accessories for Electrophoresis Tank OmniPage Mini

MC = Multichannel compatible with consecutive loading.

Description:	Comb 12 sample
Manufacturer Article Number:	VS10-12-1
Sample volume µl:	35
Thickness mm:	1.00
UNSPSC:	41-10-53-05

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Description	Manufacturer Article Number	Sample volume µl	Thickness mm	UNSPSC

Similar products

Glass Plates Gelco®

Suitable for BIO-RAD™ Mini-PROTEAN™ III and Tetra Cell.Pack of 5 plates.

Price on request

Protein staining solution

Enhanced Coomassie based protein stain formulated for fast and sensitive protein detection without the involvement of hazardous chemicals such as methanol, acetic acid, and other toxic agents. Protein detection limits are as low as 10 ng and visualization can be achieved in less than 1 hour. Applications suitable for native PAGE, SDSPAGE, isoelectric focusing, and 2D gels.Detection of protein concentration as low as 10 ngProtein bands visualization within 10 minutesWithout involvement of hazardous chemicals

From CHF 123.80*

Gel electrophoresis tank OmniPage Mini

Vertical chamber especially for protein analysis in up to 4 gels. The special manufacturing process results in a device with unique quality and durability at a very reasonable price. Easy handling and fast cooling. The dimensions are compatible with all 8 x 10 and 10 x 10 cm ready-to-use gels. High sample throughput by up to 4 gels with 20 samples each. Low buffer volume from 250 to 1200 ml.Supplied with: OmniPage Mini: chamber with platinum electrodes, 2 sets of glass plates with 1 mm thick bonded Spacers, electrodes, 2 x 12 sample combs.OmniPage Mini SYS: OmniPage Mini + caster.OmniPage Mini CBS: OmniPage Mini + caster and blotting insert.Technical specificationsGel dimensions (W x L):7.5 x 8 cmUnit dimensions (W x D x H):19 x 13 x 15 cmMax. sample capacity:80 samples, 20 samples per gelBuffer volume:min. 250 ml; max 1200 ml

From CHF 811.00*

Accessories for Gel Electrophoresis Tank VS20 Wave Maxi

MC = Multichannel compatible with consecutive loading.

Price on request

Gel electrophoresis tank proPAGE 2, gel thickness 0.75 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 0.75 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (0.75 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (0.75 mm), 3 x comb with 15 teeth (0.75 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 2, gel thickness 1 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 1 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (1 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (1 mm), 3 x comb with 15 teeth (1 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 2, gel thickness 1.5 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 1.5 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (1.5 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (1.5 mm), 3 x comb with 15 teeth (1.5 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 4, gel thickness 0.75 mm

Vertical chamber system for protein analysis in up to four hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 0.75 mm.Scope of supply: Buffer tank, lid, 2 x running module, power cables, 5 x glass plate with spacer (0.75 mm), 10 x short glass plate, dummy plate, 5 x comb with 10 teeth (0.75 mm), 5 x comb with 15 teeth (0.75 mm), 4 x casting base, 4 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,545.00*

Gel electrophoresis tank proPAGE 4, gel thickness 1 mm

Vertical chamber system for protein analysis in up to four hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 1 mm.Scope of supply: Buffer tank, lid, 2 x running module, power cables, 5 x glass plate with spacer (1 mm), 10 x short glass plate, dummy plate, 5 x comb with 10 teeth (1 mm), 5 x comb with 15 teeth (1 mm), 4 x casting base, 4 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,545.00*

Protein ladder Blue Ultra

The protein ladder is a three-color protein standard with 10 pre-stained proteins. The coloured reference bands are used as visual indicators for the process of SDS-PAGE and the efficiency of the transfer to membranes in the Western Blot. This marker is suitable for the precise identification of the molecular weight of most cellular proteins.7 blue, 2 orange reference bands and 1 green reference bandLadder is supplied in gel loading buffer and is ready-to-useVial of 500 µl

From CHF 179.00*