Accessories for Gel Electrophoresis Tank VS20 Wave Maxi

MC = Multichannel compatible with consecutive loading.

Description:	Plain glass plates with bonded spacers
Manufacturer Article Number:	VS20PGS1.5
Sample volume µl:	1.5

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Description	Manufacturer Article Number	Sample volume µl	Thickness mm	UNSPSC

Similar products

Glass Plates Gelco®

Suitable for BIO-RAD™ Mini-PROTEAN™ III and Tetra Cell.Pack of 5 plates.

Price on request

Accessories for Electrophoresis Tank OmniPage Mini

MC = Multichannel compatible with consecutive loading.

Price on request

Protein staining solution

Enhanced Coomassie based protein stain formulated for fast and sensitive protein detection without the involvement of hazardous chemicals such as methanol, acetic acid, and other toxic agents. Protein detection limits are as low as 10 ng and visualization can be achieved in less than 1 hour. Applications suitable for native PAGE, SDSPAGE, isoelectric focusing, and 2D gels.Detection of protein concentration as low as 10 ngProtein bands visualization within 10 minutesWithout involvement of hazardous chemicals

From CHF 123.80*

Gel electrophoresis tank OmniPage Mini

Vertical chamber especially for protein analysis in up to 4 gels. The special manufacturing process results in a device with unique quality and durability at a very reasonable price. Easy handling and fast cooling. The dimensions are compatible with all 8 x 10 and 10 x 10 cm ready-to-use gels. High sample throughput by up to 4 gels with 20 samples each. Low buffer volume from 250 to 1200 ml.Supplied with: OmniPage Mini: chamber with platinum electrodes, 2 sets of glass plates with 1 mm thick bonded Spacers, electrodes, 2 x 12 sample combs.OmniPage Mini SYS: OmniPage Mini + caster.OmniPage Mini CBS: OmniPage Mini + caster and blotting insert.Technical specificationsGel dimensions (W x L):7.5 x 8 cmUnit dimensions (W x D x H):19 x 13 x 15 cmMax. sample capacity:80 samples, 20 samples per gelBuffer volume:min. 250 ml; max 1200 ml

From CHF 811.00*

Protein ladder Blue Ultra

The protein ladder is a three-color protein standard with 10 pre-stained proteins. The coloured reference bands are used as visual indicators for the process of SDS-PAGE and the efficiency of the transfer to membranes in the Western Blot. This marker is suitable for the precise identification of the molecular weight of most cellular proteins.7 blue, 2 orange reference bands and 1 green reference bandLadder is supplied in gel loading buffer and is ready-to-useVial of 500 µl

From CHF 179.00*

Gel electrophoresis tank VS20 Wave Maxi

Designed to perform a variety of separations, including first- and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the VS20 WAVE is one of the most versatile maxi vertical systems available.By introducing innovative, new vertical screw-clamp technology only four screws are now necessary to secure as many 20 x 20 cm gels. This gives the VS20 WAVE Maxi the selective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the centre to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design aids both handling and set up.Whatever your requirements are the WAVE can be made to meet them. Regardless of whether it is running 2 or 4 gels, electroblotting, and IEF using capillary tube gels or IPG strips, all of these techniques may be performed using the same omni-purpose unit while retaining the benefits of large format electrophoresis, such as extended separation distances, greater sample throughput and superior resolution.VS20WAVESYS incl. VS20 WAVE Maxi, Glass plates, 2 x 24 well combs, cooling coil, casting base.VS20WAVESYS-CU incl. VS20 WAVE Maxi, 20 x 20 cm Dual, 2 sets of Glass Plates, 1 mm thick bonded spacers, 2 x 24 sample, 1 mm thick combs, cooling coil, dummy plate, caster, external casting upstand.VS20CBS incl. WAVE Maxi Vertical Unit, 2 x 4 mm thick notched glass plates, 2 x 4 mm thick plain glass plates with 1 mm thick bonded spacers, 1 x dummy plate, 2 x combs (1 mm thick 24 samples), 1 x casting base, silicone mat, cooling pack.plus: 1x WAVE Standard Electroblotting Module which includes: WAVE Maxi Platinum Wire Blotting Insert, 4 x compression cassettes and 18x fibre pads.SpecificationsGel dimensions (W x L): Gel dimensions (W x L) VS20CBS:20 x 20 cm 17.5 x 18 cmUnit dimensions (W x D x H):30 x 18 x 27 cmMax. sample capacity:2 x 48 samplesBuffer volume: Buffer volume VS20CBS:min. 4.8 l (4 gels), max. 5.3 l (2 gels) min. 5.3 l, max. 6.4 l

From CHF 1,718.00*

Gel electrophoresis tank proPAGE 2, gel thickness 0.75 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 0.75 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (0.75 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (0.75 mm), 3 x comb with 15 teeth (0.75 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 2, gel thickness 1 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 1 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (1 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (1 mm), 3 x comb with 15 teeth (1 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 2, gel thickness 1.5 mm

Vertical chamber system for protein analysis in up to two hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 1.5 mm.Scope of supply: Buffer tank, lid, running module, power cables, 3 x glass plate with spacer (1.5 mm), 5 x short glass plate, dummy plate, 3 x comb with 10 teeth (1.5 mm), 3 x comb with 15 teeth (1.5 mm), 2 x casting base, 2 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,133.00*

Gel electrophoresis tank proPAGE 4, gel thickness 0.75 mm

Vertical chamber system for protein analysis in up to four hand or pre-cast gels. A maximum of 15 samples can be analysed per gel. Ideal for performing polyacrylamide gel electrophoresis (PAGE). The intuitive plate sealing system makes set-up quick and easy. High-quality moulded parts prevent leaks and ensure a long lifetime of the system. Glass plates with bonded spacers prevent gel leakage during casting and allow accurrate alignment of the gel edges. Combs with side teeth prevent slipping when casting the gel.Set for a gel thickness of 0.75 mm.Scope of supply: Buffer tank, lid, 2 x running module, power cables, 5 x glass plate with spacer (0.75 mm), 10 x short glass plate, dummy plate, 5 x comb with 10 teeth (0.75 mm), 5 x comb with 15 teeth (0.75 mm), 4 x casting base, 4 x casting frame with clamps, glass plate separator, sample loading guide

From CHF 1,545.00*