Accessories for Screw pump VACUU·PURE® 10
CHF 737.50*
Content:
1
Delivery according to order confirmation
Product number:
6316421
Manufacturer:
Vacuubrand GmbH & Co.KG
Packaging information:
Weight:
0.987 kg
Description
Properties
| Description: | Exhaust vapor condenser EK 600 with round bottom flask 500 ml, with KF DN 25 |
|---|---|
| Manufacturer Article Number: | 20751801 |
| UNSPSC: | 40151502 |
Skip product gallery
Piston pump LLG-uniVACUUPUMP 1
From
CHF 271.00*
Piston pump, complete
From
CHF 680.00*
Screw pumps VACUU·PURE® 10
From
CHF 11,040.00*
Kompressorstation SICOLAB mini
From
CHF 4,100.50*
Kompressorstation SICOLAB M, mit Membrantrockner
From
CHF 10,968.27*
Screw pumps VACUU·PURE® 10C
From
CHF 13,140.00*
Similar products
The portable piston pump LLG-uniVACUUPUMP 1 has been developed for vacuum and pressure applications in the laboratory, in particular in the field of Life Science. Typical applications for this low-cost vacuum pump are the single funnel filtration of aqueous and buffered solutions, SPE, as well as any applications where no harmful gases are conveyed. The LLG-uniVACUUPUMP 1 operates oil-free and can also be used as a compressor to a pressure up to 3.3 bar. This allows you, for example, pressure filtration, if vacuum filtration is not sufficient.Not recommended for pumping organic, acidic, or basic vapours.Advantages:Dry-running technology for physical applicationsCan be used as a vacuum pump and compressorCost-effective alternative for water pumpsSound suppressor for quiet operationCompact, light weight and portableOil-free, suitable for continuous operationSuction/pressure connection: hose nozzle DN 6 for hose inner diameter 6 mmMax. Operating gas temperature: 60 °CScope of supply: Pump, incl. 2 hose clamps, EU + UK-plug power cord
Piston pumps are a reliable partner for physical applications, notably with aqueous solutions. Being a vacuum pump and compressor, it can be used for a wide variety of applications such as filtration, gas sampling, vacuum drying, desiccation and automation technology. The integrated vacuum and pressure gauges and regulators allow the pressure to be continuously monitored and adjusted. For use with dry or aqueous vapor applications only.Oil freeEasy to cleanEasy maintenanceEasy handling and control featuresRobust constructionPressure connection with exhaust silencerSuction/pressure connection: hose nozzle DN 8 for hose inner diameter 8 mmMax. Operating gas temperature: 60 °CScope of delivery: vacuum pump, vacuum and pressure regulators with gauges, inlet water trap and muffler
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfacePowerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interface
New
Kompakter, schallgedämmter Kompressor für die Verwendung von Druckluft im Laborbereich. Die ölfreie Plug-and-Play Kompressoreinheit mit integriertem Tragegriff bietet minimalen Wartungsaufwand bei maximaler Flexibilität. Der SICOLAB mini ist mit einem 2-Liter-Druckluftbehälter, automatischem Kondensatablass, elektromagnetischer Anlaufentlastung und einem Betriebsstundenzähler ausgestattet.Sehr ruhiger AnlaufExtrem leiseWartungsfrei bis auf FilterwechselDruckluftanschluss mittels Schnellkupplung direkt im GehäuseÖlfreies KompressoraggregatBehälter mit InnenbeschichtungDruckmindererDruckschalterManometer von außen ablesbarSicherheitsventilEin-/Ausschalter mit Sicherung
New
Kleiner, leiser Kompressor für die Verwendung von Druckluft im Laborbereich. Der ölfreie Kolbenkompressor ist langlebig, reduziert den Wartungsaufwand und sorgt für saubere Luft und verlässliche Messergebnisse. Die Kompressorstation läuft vibrationsarm und senkt dank spezieller Schalldämmung den Geräuschpegel. Lenkrollen und integrierte Tragegriffe ermöglichen einen mobilen Einsatz.Kompakte „Untertisch-Bauweise“Für 100 % Dauerbetrieb geeignetAnschlussfertig: einfacher und schneller Start durch Plug-and-PlayIntuitive Bedienung dank übersichtlich angeordneter SteuerelementeAutomatischer Kondensatverdampfer - kein manuelles Entleeren notwendigEinstellbarer Versorgungsdruck bis 8 barKorrosionsgeschützte, antibakterielle BehälterinnenbeschichtungZwei Druckluftausgänge: Luftentnahme über eine Schnellkupplung auf der Vorderseite und einen zusätzlichen Druckluftanschluss auf der RückseiteUmweltfreundlich dank Ölfrei-TechnologieWartungsfrei bis auf Filterwechsel, kein ÖlwechselDas Membrantrocknungssystem sorgt auch bei Dauerbetrieb für trockene Druckluft, um empfindliche Instrumente zu schützen und hygienische Bedingungen zu gewährleisten. Es benötigt keine Regenerationsunterbrechungen und das patentierte Druckbegrenzungsventil optimiert das Anfahrverhalten. Der Drucktaupunkt ist durch verschiedene Düsen an die jeweiligen Anforderungen anpassbar (Drucktaupunktabsenkung bis zu 65 K möglich).
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfaceThe chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.