Accessories for distillation unit K-350/K-355
CHF 1,405.00*
Content:
1
Delivery according to order confirmation
Product number:
6261743
Manufacturer:
Büchi Labortechnik GmbH
Packaging information:
Length:
358 mm
Width:
191 mm
Height:
230 mm
Weight:
0.85 kg
Description
Properties
| Description: | Splash guard |
|---|---|
| Manufacturer Article Number: | 043332 |
Skip product gallery
Air regulator Type HM-2
From
CHF 28.00*
Boiling stones, Type A
From
CHF 23.30*
Boiling stones behrotest®
From
CHF 41.20*
Boiling stones, Type B
From
CHF 20.30*
Boiling stones, PTFE
From
CHF 131.00*
Gas inlet tube with valve stopcock, DURAN® tubing
From
CHF 130.00*
Gas inlet tubes, bent, DURAN® tubing
From
CHF 22.50*
Gas inlet tubes, straight, ground glass joint, DURAN® tubing
From
CHF 19.80*
Boiling chips, type Resistent
From
CHF 39.00*
Similar products
For tubes:8mm to 15mm diameter, 6mm to 12.5mm diameterFor air-leak capillary tubes. Acts as a fine regulation valve (needle valve). Plastic body. Brass needle with fine thread.
Developed for use in preparatory work. For distillation and reflux in aqueous, neutral and alkaline solvents, even under a vacuum. Effective in even the smallest volumes of liquid and after multiple interruptions. Prevents any bumping. Natural product.
behrotest® boiling stones are made from a ceramic material. Compared to conventional boiling stones made of glass, they provide optimum protection against defervescence due to their porosity and their shape, even with badly blended samples.behrotest® boiling stones are chemically pure and guarantee unadulterated results when determining the COD, the Kjeldahl nitrogen etc.
Specifically for analytical work. Can be used for distillation in a clean, neutral and basic environment. Not suitable for vacuum distillation. Effective in the smallest amounts of liquid, also after multiple distillations. Prevents " bumping". Ceramic product with relatively high level of purity and abrasion resistance.
Prevents bubbling and bumping when boiling a medium.Long lifeUniversal chemical resistanceOperating temperature -200 °C to 250 °C
Made of DURAN® tubing. With valve stopcock for dosing, with glass olive (angle: 90°).
Made of DURAN® tubing. Bent air leak tubes (angle: 90°), built-in length: 250mm, with NS cone and thin capillary (easily to draw by burner).
Made of DURAN® tubing. Straight air leak tubes, built-in length: 200mm, with NS cone and thin capillary (easily to draw by burner).
Developed for preparatory and analytical purposes. Suitable for biochemistry, biotechnology, microbiology, microanalysis. Can even be used in strong acids and alkalis, and in all solvents and oxidants. Suitable for vacuum and high-vacuum distillation. Reduces distillation times in rotary evaporators. No abrasion, absorption of substances or solvents. Softening (evaporation) occurs at 2500°C. Can be sterilised by dry heating. Effective in even the smallest volumes of liquid, even after multiple interruptions. Prevents any bumping. Highly resistant.