Adapter for thermometer, borosilicate glass 3.3
CHF 17.80*
Content:
1
| Quantity | Unit price |
|---|---|
| To 9 |
CHF 17.80*
|
| From 10 |
CHF 13.90*
|
15 Available. Delivery time: 1-2 workdays
37 Available. Delivery time: 5-7 workdays
Product number:
4008360
Manufacturer:
ISOLAB Laborgeräte GmbH
Packaging information:
Length:
133 mm
Width:
40 mm
Height:
40 mm
Weight:
0.017 kg
Description
Manufactured from borosilicate glass 3.3 according to DIN 12257 standard, ideal to use for thermometers with Ø 6 - 8 mm. Screw joint provides easy depth adjustment of thermometer. Seal material: NBR.
Properties
| Bore: | 8 mm |
|---|---|
| Cone[s]: | NS14/23 |
| Manufacturer Article Number: | 065.21.014 |
| Material: | Boro 3.3 |
| Standard: | DIN 12257 |
| Thread: | GL 14 |
Skip product gallery
From
CHF 1.90*
From
CHF 14.95*
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Screwthread tubes for glassblowers, DURAN® tubing
Acc. to DIN 12216 and in addition to standard, with DIN thread (GL).
LLG Labware
LLG Labware
LLG-Adapter for thermometer, borosilicate glass 3.3
Adapter for securing thermometers. With compression screw cap and O-ring.
Skip product gallery
From
CHF 37.00*
From
CHF 9.30*
From
CHF 9.50*
From
CHF 2.00*
From
CHF 55.20*
From
CHF 30.90*
From
CHF 4.80*
From
CHF 3.70*
From
CHF 6.30*
From
CHF 19.00*
From
CHF 36.30*
Accessories
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
Skip product gallery
5-step irreversible temperature strips Thermax®
From
CHF 21.20*
Pocket thermometers
From
CHF 46.00*
LLG-General purpose thermometers economy, blue filling
From
CHF 6.95*
LLG-General-purpose thermometers
From
CHF 18.40*
Simple type thermometer, solid stem
From
CHF 6.40*
Simple type thermometer, solid stem, immersion depth total
From
CHF 4.80*
LLG-General purpose thermometer, red filling, immersion depth total
From
CHF 17.30*
LLG-General-purpose thermometers, green filling
From
CHF 21.50*
Thermometers, standard ground joint
From
CHF 72.70*
LLG-Min./Max. Thermometer with outdoor sensor
From
CHF 19.50*
Similar products
5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.
Red spirit filled glass thermometers with nickel-plated, double plug collar which locks the thermometer into its case or allows the case to connect to the top of the thermometer as an extenson handle. Approx. dimensions when fitted into case: 145 x 11.5 mm diameter, with pocket clip. With uncoated prismatic measuring capillary.
Solid stem, with loop, capillary yellow enameled, graduation resistant against acids and alkalis.
Enclosed-scale type, with eyelet. With uncoated, prismatic measuring capillary. Red spirit filling (except 9.235 265: blue). Immersion depth: total.Note: The colour of these types (temperature range up to 200 and 250 °C) may fade after extended periods of use at high temperatures.
With ring at the top, durable pigment, in transparent square plastic case. Scale background in white.
With ring at the top, durable pigment, in transparent square plastic case. Scale background in white.
Graduation resistant against acids and alkalies.
Glass, solid stem, with loop, white backed. Environmentally friendly thermometer, with biodegradable, green spirit filling.
With NS 14.5/23 cone. Enclosed-scale type, Translucent glass scale. Upper section approx. 11 mm diameter, lower section 7.5 mm diameter. Richter-top finish seal without button. Suitable for official calibration.
Digital thermometer with outdoor sensor.Dual LCD display max./min. temperatureMeasuring temperature range can be switched to °FDisplay size 40 x 30 mmPlease order battery (AAA 1.5 V) separately.
Skip product gallery
NMR tubes, 5 mm, DURAN®, Economic
From
CHF 3.80*
Erlenmeyer flasks, Borosilicate glass 3.3, narrow neck
From
CHF 25.60*
LLG-Test tubes, soda-lime glass
From
CHF 16.30*
Customers also bought
NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code.The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.
DIN ISO 1773With graduations and beaded rim
Test tubes with round bottom.Hydrolytic resistance: Class HGB 3 acc. to ISO 719, Type III acc. to C - USP.
