Adapter for tubing, borosilicate glass 3.3, angled (90°), with stopcock
Product number:
4008369
Manufacturer:
ISOLAB Laborgeräte GmbH
Packaging information:
Length:
168 mm
Width:
63 mm
Height:
65 mm
Weight:
0.056 kg
Description
Tubing adapter is suitable for up to 10 mm tubing.
Tubing adapter is suitable for up to 10 mm tubing.
Properties
| Cone[s]: | NS29/32 |
|---|---|
| Manufacturer Article Number: | 065.25.029 |
| Material: | Boro 3.3 |
| Shape (Glass components): | Bent |
| With stopcock: | Yes |
Skip product gallery
From
CHF 2.00*
From
CHF 37.00*
From
CHF 4.80*
From
CHF 3.70*
From
CHF 19.00*
From
CHF 9.50*
From
CHF 30.90*
From
CHF 9.30*
Accessories
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Skip product gallery
Screw connector caps, PBT
From
CHF 3.00*
Silicone cap wads/septa, VMQ
From
CHF 1.00*
Threaded tube with NS core, DURAN® tubing
From
CHF 10.90*
Reduction adapters, DURAN® tubing
From
CHF 13.10*
Silicone sealing rings, VMQ
From
CHF 4.90*
Screw caps for screwthread tubes, PBT
From
CHF 2.80*
Adapters, straight, without stopcock
From
CHF 14.40*
Adapters, angled (90°), without stopcock
From
CHF 16.60*
Expansion adapters, DURAN® tubing
From
CHF 19.00*
Adapters, angled (90°), with stopcock
From
CHF 44.80*
Similar products
Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. With GL thread and NS core.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Reduction adapters with ground joint.
With vulcanized PTFE sleeveFor screwthread capsThermical resistance: 130°C (steam), 200°C (heat)Autoclavable
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Expansion adapters with ground joint.
Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.Made of DURAN® tubing. Adapter, NS cone to 10 mm bore tubing connector.