Bottle top filter, PS, sterile, PES membrane
CHF 186.00*
Content:
24
Delivery according to order confirmation
Product number:
6314341
Manufacturer:
Guangzhou JET Bio-Filtration
Packaging information:
Description
For sterile filtration of culture media, buffers and reagents.
- With graduation
- Inclined hose connector
- Sterilized by irradiation, SAL 10-6
- DNase/RNase-free, pyrogen free
- GL45
Properties
| Filter Ø: | 50 mm |
|---|---|
| Manufacturer Article Number: | FPE214150 |
| Material: | PS |
| Max. filter Ø: | 50 mm |
| Nominal capacity: | 150 ml |
| Pore size: | 0,22 µm |
| Sterile: | Yes |
Skip product gallery
Bottle Top Filters Nalgene™ Rapid-Flow™, PES Membrane, sterile
Price on request
Filter Storage Bottles Nalgene™ Rapid-Flow™, PS, sterile
From
CHF 6.80*
Filter units, PES membrane, sterile
Price on request
Filter units Nalgene™ Rapid-Flow™, PES Membrane, sterile
From
CHF 28.70*
Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
From
CHF 140.40*
Filter units, Sartolab® RF, PES membrane, sterile
From
CHF 229.00*
Filter Units Nalgene™, Low Profile, PES Membrane, sterile
From
CHF 11.00*
Filter Units Nalgene™, PSU, without membrane
From
CHF 291.30*
TPP vacuum filtration "Rapid" filtermax
From
CHF 94.50*
Similar products
Filters securely screw onto glass media bottles with 33 mm or 45 mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles.Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Easy-to-use ergonomic design. Can be used to store sterilised filtrate. Radiation-sterilised to save you time and minimize contamination. Also handy as presterilised, single-use storage containers. 1-1/2-turn threaded screw closure guarantees a leakproof seal and eliminates pH shift in receivers. Certified. Pyrogen-free, non cytotoxic. Sterile, graduated and leakproof.
These bottle-top filter units are ideally suited for the separation or purification of samples which are contained in large volumes. Bottle-top filter and reservoir bottle are includedLight weight and stable wall constructionLarge knurls on the reservoir bottle cap for easy screwingWide bottle mouth for efficient pouring outVolume graduationHose connector fits multiple diametersPyrogen-freeMembrane material: Polyethersulfone (PES)GL45
Ideal for biological and pharmaceutical sterile filtration. PES membrane features low protein binding, low level of extractables and a high flow rate. Now available in three pore sizes: The best filter units with 0.20µm and 0.45µm pore size and new to the protection of valuable cell cultures from mycoplasma with 0.10µm pore size. Filter top and filtrate bottle are graduated. Blue color-coded collar with cellulosic vent plug side arm and quick-disconnect tubing adapter. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Filter units with receiver for sterile filtration of aqueous solutions and media, particularly cell culture. Simple and safe to handle. The integral polyethersulfone (PES) membrane guarantees extremely good throughput times and low protein binding, making it ideal for filtering proteinaceous solutions. The receiver is supplied with a flexible vacuum tubing adapter and a lid.
Compact Nalgene™ filter units with PES membrane are ideally suited for quick filtration of samples between 50 to 100 ml.Unitary construction with non-separable upper and receiver componentsPadless membrane support minimizes foaming of proteinaceous samplesPyrogen-freeSterile
Graduated reusable filtration unit bodies with upper manifolds and lower receivers made of unbreakable polysulphone (PSU). Nominal filtration surface 11cm². With membrane support plate. Without membrane. For filter membrane from 47mm to 50mm.
This vacuum filtration system from TPP provides high yield and a quick filtering of your solution. All TPP vacuum filtration systems of the "Rapid" filtermax family have the same product features:
High flow speed through the 49 cm2, (69 cm2 = 1000 ml), square filter surface.
Low protein binding! The pes filter membrane with pore size of 0.22 ìM is characterized by a low protein binding.
Square shape of the bottle subint as a medium reservoir saves valuable space in the fridge as a warehouse bottle. A single -packed sterile screw cover is supplied with every system.
Ideal shape with rejuvenation results in a secure and non -slip gripping of the system with rubber gloves.
The square shape achieves exceptionally safe stand behavior. This reduces the falling over the unit by the weight of the vacuum tube.
All vacuum filtration systems have a uniform G45 screw cap and can thus be combined with each other