Calibration certificates Temperature for Cooling incubators KB ECO
CHF 1,548.00*
Content:
1
Delivery according to order confirmation
Product number:
4685498
Manufacturer:
BINDER GmbH
Packaging information:
Description
Temperature measurement in the cooling incubator at a specific test temperature.
Properties
| Description: | Temperature measurement with 15 ... 18 measuring points |
|---|---|
| Manufacturer Article Number: | 8012-2109 |
Skip product gallery
LLG-Petri dishes, PS
From
CHF 42.25*
Cooling incubator KT
From
CHF 5,876.00*
Peltier-cooled incubator IPPecoplus
From
CHF 5,754.00*
Mini cooling incubator LLG-uniINCU 20 cool
From
CHF 1,190.00*
Cooling incubators KB ECO
From
CHF 10,282.00*
Peltier-cooled incubators IPP
From
CHF 3,981.00*
Peltier-cooled incubator IPPeco
From
CHF 6,496.00*
Cooled incubator FTC 120
From
CHF 1,872.00*
Similar products
Made of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.With a smooth surface for an optimal distribution of the transport mediumStable thickness to prevent any deformations while usingStackableWith or without ventsAseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)For research and development only.
Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarmComputer interface: EthernetData recording and USB interface
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
Digital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubatorLarge inner chamber with 22 l capacityFast heating and homogeneous temperatureWith built-in calibration function of up to ±5 °CTemperature accuracy is ±0.5 °C (at 37 °C)Temperature uniformity is ±1.5 °C (at 37 °C)Scope of supply: Incubator, 1 x shelf, 1 x drip tray, 1 x power supply unit, 1 x power cable, operating instructions
Cooling incubator with environmentally friendly Peltier technology and APT.line™ preheating chamber technology for optimal incubation conditions. Ideal for applications in biotechnological, medical and pharmaceutical laboratories.Condensate and dry-out protection for all operating conditionsFail-safe operation due to intelligent thermoelectric temperature controlProgrammable temperatures for intermitted incubation and refrigerationAPT.line™ preheating chamber technologyAdjustable condensate protectionMinimal energy consumption thanks to Peltier technologyInner door made of safety glassInner chamber completely made of stainless steelInsertion grids made of stainless steelLCD display shows temperature, additional information and alarmsInternal data logger, measured values can be read out in open format via USBDevice self-test for status analysis
Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.Extremely quiet, vibration-free and space saving as no compressor is requiredNo condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchangedLED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)SingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionSingleDISPLAY: ControlCOCKPIT with one colour displayYou can find a detailed description of the "SingleDISPLAY" model at www.memmert.com
Cooled incubator with class A+ energy efficiency. Especially designed for BOD measurements.Fixed temperature of 20 °C.For up to 3 x BOD sensor system 6 bottles or 2 x BOD sensor system 10 bottles2 internal sockets for further devicesForced ventilation for uniform temperature distribution2-digit display for indoor temperatureHigh efficiency, low operating costsScope of supply: Cooled incubator, 2 shelves