Cleaning and storage solutions for pH electrodes
CHF 158.65*
Content:
1
Delivery according to order confirmation
Product number:
7608345
Manufacturer:
Thermo Elect.LED GmbH (Orion)
Packaging information:
Length:
73 mm
Width:
73 mm
Height:
155 mm
Weight:
0.6 kg
Description
These solutions prolong life and restore performance of pH electrodes or are used for storage and cleaning.
Cleaning solutions
Solutions are delivered with a small beaker and a plastic pipette.
Storage solutions
Cleaning solutions
- Cleaning solution A for removing protein contaminants
- Cleaning solution C for general cleaning
- Cleaning solution D for removing oil and grease contaminants
Solutions are delivered with a small beaker and a plastic pipette.
Storage solutions
- Ensure the proper function of pH electrodes even after prolonged storage
| Hazardous Substance Data | |
| H-Satz | EUH210 |
| P-Satz | P202 |
| SDS | Link |
Properties
| Manufacturer Article Number: | 810001 |
|---|---|
| Package contents: | 1 bottle of 475 ml |
| Type: | Storage solution for ROSS pH electrodes |
Skip product gallery
LLG-Conductivity Solutions
From
CHF 27.40*
Conductivity standards, ISO 17025
From
CHF 60.70*
Conductivity calibration solutions
From
CHF 92.40*
Calibration and test material for conductivity measurements
From
CHF 163.00*
Orion™ calibration standards and TISAB solutions for ISE fluoride electrodes
From
CHF 144.60*
Standards and storing solutions for ammonia ISE electrodes
From
CHF 127.45*
Conductivity testing solutions
From
CHF 46.20*
Similar products
Values stated at 25°C: Accuracy ±1%Directly traceable to NISTCertificate including actual value, expiration date and uncertainty of measurementThe safety data sheets of these products are available under www.llg-labware.com.
Conductivity standards tested and ISO 17025 certified at 25 °C. Uncertainty of measurement of ± 1%. Directly traceable to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Supplied in 500 ml HDPE bottle. 1.3 µS/cm in 250 ml bottle. Calibration values 84, 147, 1413, 12880 µS/cm. Control Values 1.3 - 350000 µS/cm.*1.25 - 1.35 µS/cm at 25 °C.
Disposable bags for effective calibration. Traceability according to NIST.
Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cellOptimal measuring safety by PTB/NIST traceable standard solutionsEasy device check by highly precise test resistorsPharmacopeia conforming test kits
Calibration standards ensure measurement accuracy. TISAB (Total Ionic Strength Adjustment Buffer) solutions are used to adjust the ionic strength for fluoride measurements.
For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.
Values stated at 25°C. Supplied in containers as indicated. Accuracy ± 2%.* Supplied in vials!