Condensers acc. to Liebig, DURAN® tubing, with glass olives

Made of DURAN^® tubing. DIN 12576 and in addition to DIN standard. With NS cone and socket.

Connection:	Glass olive
Cooling surface:	160 cm²
Ground size:	NS14/23
Length jacket:	400 mm
Manufacturer Article Number:	05210401
Material:	DURAN® tubing
Type of construction (glass components):	Liebig condenser
UNSPSC:	41104814

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Cooling surface	Ground size	Length jacket	Manufacturer Article Number

Other customers also bought

Lenz-Laborglas GmbH & Co. KG

Condensers acc. to Allihn with GL threads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12581 and in addition to DIN standard. For condensing vapours. With NS cone and socket water connection GL14 threads with two threaded plastic olives.

From CHF 93.60*

Lenz-Laborglas GmbH & Co. KG

Condensers acc. to Dimroth, with GL threads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12591 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.

From CHF 134.00*

Accessories

Buddeberg GmbH

BUDDE - joint grease

For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.

From CHF 30.90*

Bohlender GmbH

Sleeves, cone joint, PTFE

With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.

From CHF 9.50*

Bohlender GmbH

Sleeves with ribs, PTFE

For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.

From CHF 2.00*

J.P. Pöllath

Joint grease, K.W.S

Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.

From CHF 19.00*

H W S Hans W. Schmidt

Ground joint clips for sleeve connections, wire, Chrome-nickel steel

Chrome-nickel steel.

From CHF 3.70*

DWK Life Sciences GmbH (Duran)

Engler distilling flasks, DURAN®, ASTM, with beaded rim

Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405

From CHF 55.20*

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for conical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 4.80*

Dr. Dietmar Glindemann

PTFE sealing rings for jointed glassware

An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage

From CHF 36.30*

Otto Fahsig GmbH

Gas leak detection fluid, bottle

DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.

From CHF 9.30*

Lenz-Laborglas GmbH & Co. KG

Joint clips for conical joint sleeve connections, stainless steel, with set screw

For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below

From CHF 37.00*

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for spherical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 6.30*

Similar products

Coil condensers, DURAN® tubing, with glass olives

Made of DURAN® tubing. Acc. to DIN 12593 and in addition to DIN standard. With jacketed cooling coil. Water connection with glass olives.

From CHF 155.00*

Coil condensers, DURAN® tubing, with plastic olives

Made of DURAN® tubing. Acc. to DIN 12593 and in addition to DIN standard. With jacketed cooling coil. Water connection with GL 14 thread with two threaded plastic olives.

From CHF 153.00*

Spiral condensers, DURAN® tubing, with PP olives

Made of DURAN® tubing. For cooling condensates. Water connections with GL14 threads with two threaded plastic olives.

From CHF 115.00*

Condensers, ground glass joint, Allihn, borosilicate glass 3.3

Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12581. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9mm bore size.

From CHF 62.70*

Condensers acc. to Allihn with GL threads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12581 and in addition to DIN standard. For condensing vapours. With NS cone and socket water connection GL14 threads with two threaded plastic olives.

From CHF 93.60*

Condensers acc. to Dimroth, with GL threads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12591 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.

From CHF 134.00*

Air condensers without jacket, DURAN® tubing

Made of DURAN® tubing. For easily condensable vapours. With NS cone and drain ring.

From CHF 22.20*

Condensers, ground glass joint, Liebig, borosilicate glass 3.3, with PP olives

Made of borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12576. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9mm bore size.

From CHF 41.10*

Condensers, ground glass joint, Allihn

Manufactured from borosilicate glass 3.3 according to DIN 12581 standard. Supplied with glass side arm.The side arms accept tubings with 8/9 mm bore size.

From CHF 64.90*

Spiral condensers, borosilicate glass 3.3, with glass olive

Made of borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12592. The side arms accept tubings with 8/9 mm bore size.

From CHF 43.50*