Conductivity cell probes, for PrimeLab 2.0
CHF 461.00*
Content:
1
Delivery according to order confirmation
Product number:
4686965
Manufacturer:
Water-i.d. GmbH
Packaging information:
Description
For conductivity measurements in the laboratory.
- With integrated temperature sensor
- For connecting to the ProbeBOX 1.0
Properties
| Cell constant: | 10.0 1/cm |
|---|---|
| Conductivity: | 20 ... 2000 mS/cm |
| Manufacturer Article Number: | PL2SP-ELECHRPCA |
| Material shaft: | Plastic |
| Max. temperature: | 80 °C |
| Min. temperature: | 0 °C |
| Temperature: | 0 ... 80 °C |
| Temperature sensor: | NTC 30 kOhm |
Skip product gallery
From
CHF 92.40*
Accessories
Water-i.d. GmbH
Water-i.d. GmbH
Conductivity calibration solutions
Disposable bags for effective calibration. Traceability according to NIST.
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
CHF 133.40*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
Cells for Photometer photoLab®
From
CHF 95.20*
Photometer system MultiDirect
From
CHF 2,064.00*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
Cuvettes for photometric routine and water analytics in the UV-VIS and VIS range. Cells with matt side surface are suitable for the automatic cell detection of the photoLab® filter and spectral photometer. The glass and quartz cuvettes have a marking in order to place the cuvettes into the photometer in the same direction for an even higher precision.Automatic cell detectionGlass and quartz cells with marking for higher precisionHigh quality optical glass for VISHigh quality quartz glas for UV-VIS
With Dual Beam Technology. The MultiDirect is a modern, microprocessor-controlled photometer with ergonomically designed keypad and large-format graphic display. It is equipped with a wide range of pre-programmed methods (e.g. ammonia, COD, phosphate) based on the proven range of Lovibond® tablet reagents, liquid reagents, vial tests and powder reagents. The calibration and software-supported control options mean that the unit is also suitable for use as a testing instrument. The seven standard rechargeable batteries (supplied) ensure easy mobile use.Wide range of pre-programmed methodsLarge, graphics displayRS232 interfaceSuitable for use with standard rechargeable batteriesUpdates for new methods and languages via the Internet1000 data set memoryCustom method recall is also possibleScope of supply: MultiDirect, ready-to-use incl. 7 x rechargeable batteries and battery charger for 100 - 240V, 3 each 24mm and 16mm cuvettes, 16mm cuvette adapter, 3 x syringes, 1 x 100ml plastic beaker and case with waterproof insert. Without reagents and without battery (please order separately).Verification Standard Kit: The verification standard kit for the MultiDirect is designed to reassure the user about the accuracy and the reliability of the results. The shelf life of the standard kit is two years from the date of production, provided that storage and use are in accordance with the instructions provided. Measurements are taken in mAbs.Specifications
Optics:
Dual-Beam Technology, High-quality Interference FiltersMeasuring time:
Power supply:approx. 10 seconds
7 Ni-MH-battery pack (1.5V AA), charged in the unit using external power packDimensions (W x D x H):
Ambient operating conditions:
Approval:265mm x 70mm x 195mm
up to max 90 % humidity (non condensing), approx. 5 ... 40 °C
CEWavelengths:430/ 530/ 560/ 580/ 610/ 660nm