Diaphragm Pumps for Vacuum Ovens
CHF 10,125.00*
Content:
1
Delivery according to order confirmation
Product number:
7024478
Manufacturer:
Thermo Elect.LED GmbH (Kendro)
Packaging information:
Weight:
18 kg
Description
- Gentle drying of heat sensitive materials
- Significantly reduced drying times when compared to convectional oven without vacuum
- Drying of intricately designed parts
- Elimination of oxidation associated with heat treatment
- Targeted recovery of degassed product
- Capacity refers to the trap in ml
* Rotary Vane Pump, Water Vapor Compatibility 40 mbar.
Properties
| Depth: | 338 mm |
|---|---|
| Dimensions (WxDxH): | 241 x 338 x 500 mm |
| Flow rate: | 3.0 m³/h |
| Height: | 500 mm |
| Manufacturer Article Number: | 50028362 |
| Type: | HMD 4C |
| UNSPSC: | 41-10-51-01 |
| Ultimate vacuum: | 2 mbar |
| Weight: | 18 kg |
| Width: | 241 mm |
Skip product gallery
From
CHF 20,048.00*
Accessories
Thermo Elect.LED GmbH (Kendro)
Thermo Elect.LED GmbH (Kendro)
Vacuum oven Vacutherm™ VT 6000 P, heated shelves
For the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steelSilicone door sealSmall flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinetAn overheat cut-out (Class 2) is supplied as standardTubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm™ 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
Skip product gallery
Vacuum drying ovens VDL series
From
CHF 16,894.00*
Vacuum drying ovens VD series
From
CHF 9,242.00*
Chemical membrane pump VP2
From
CHF 10,540.17*
Pump cabinet set VD with vacuum pump VP1
From
CHF 6,570.00*
Pump cabinet set VD with vacuum pump VP2
From
CHF 15,304.40*
Pump cabinet set VDL with vacuum pump VP5 EX
From
CHF 22,231.72*
Vacuum pump cabinet Vacucenter 1
From
CHF 13,328.00*
Similar products
For gentle, fast drying without residues, incrustations or oxidation.Direct heat transfer through large thermal conducting platesProgram-controlled drying monitoring with automatic ventilation at end of processInternal data logger, measured values can be read out in open format via USBInert gas connectionShatterproof, spring-mounted safety glass panelLarge viewing windowAluminum expansion racks, can be custom-positionedEthernet interfaceFor flammable solventsATEX conformity for units: EX II 2/3/- G IIB T3 Gb/Gc/- XIntuitive touchscreen controller with graphical pressure and temperature displayPressure control device for heating activated from
For gentle, fast drying without residues, incrustations or oxidation.Direct heat transfer through large thermal conducting platesProgram-controlled drying monitoring with automatic ventilation at end of processInternal data logger, measured values can be read out in open format via USBInert gas connectionShatterproof, spring-mounted safety glass panelLarge viewing windowAluminum expansion racks, can be custom-positionedEthernet interfaceFor non-flammable solventsController with digital display of pressure and temperatureAccess port DN 16
The VP2 vacuum pump, together with the VD series vacuum drying ovens, is ideally suited for drying aqueous and non-flammable solvents.Resistant to a wide range of chemicalsVery quiet and low-vibration operationDesigned for S1 operating mode (continuous operation)Suction and pressure-side separators for collecting condensate
Set consisting of VP1 vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VD series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a switchable socket that can be controlled via the controller of the vacuum drying oven.
Set consisting of VP2 vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VD series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a switchable socket that can be controlled via the controller of the vacuum drying oven.
Set consisting of VP5 EX vacuum pump, pump cabinet (under cabinet) for housing the pump and a connection kit for connecting the pump to the VDL series vacuum drying oven. The under cabinet raises the vacuum drying chamber to an ergonomic working height, reduces pump noise and protects the pump from mechanical damage. The pump cabinet contains a stainless steel drip tray. There is an exhaust port (Ø 100 mm) on the rear wall of the pump cabinet for connection to an on-site exhaust system.
This vacuum pump cabinet can be used with VT 6060 and VT 6130 vacuum drying ovens. It carries the vacuum pump (we offer three different pumps for a broad range of applications) and includes a central power supply and a main switch for both oven and pump.