Dispersing tube for Dispersing system ULTRA-TURRAX® Tube Drive
CHF 187.30*
Content:
10
Delivery according to order confirmation
Product number:
7635287
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Weight:
0.65 kg
Description
Properties
| Description: | Mit Glaskugeln |
|---|---|
| Manufacturer Article Number: | 0003699800 |
| Nominal capacity: | 50 ml |
| Sterile: | No |
| Type: | BMT-50 G |
| UNSPSC: | 41-11-61-16 |
Skip product gallery
Dispersing heads for T 18 ULTRA-TURRAX® series
From
CHF 387.40*
Disperser System ULTRA-TURRAX® Tube Drive
From
CHF 880.10*
Dispersing heads for T 25 ULTRA-TURRAX® series
From
CHF 387.40*
Dispersing heads for Homogeniser POLYTRON®
From
CHF 538.00*
Disperser System ULTRA-TURRAX® Tube Drive P control
From
CHF 1,917.00*
High-power homogeniser T 50 digital ULTRA-TURRAX®
From
CHF 4,988.00*
Stands for Homogenisers POLYTRON®
From
CHF 27.50*
Stand Homogenisers POLYTRON® PT 10-35 GT (Ecoline)
From
CHF 2,785.00*
Homogeniser T 25 easy clean digital
From
CHF 2,793.00*
Dispersing heads for T 25 easy clean digital / T 25 easy clean control
From
CHF 1,725.00*
Similar products
Plastic dispersing heads: AutoclavableStainless steel dispersing heads: Ultimate fineness emulsions 1 to 10 µm and suspensions 10 to 50 µm, sterilisable by all methods.
Disperse, stir and grind using a single drive unit. Patented disposable disperser system for volumes from 2 to 50 ml with hermetically sealable, disposable sample tubes. Provides protection and safety from: Infectious samples, toxic substances, strong-smelling materials.No possibility of cross-contaminationSuitable for individual or serial operationsIncreased safety due to low voltage (24 V) powerChemically resistant plastic containersAnti-locking functionScope of supply: Device incl. removal hook for removing the rotor-stator unitDispersing tubes (20 and 50 ml) with pierceable membrane and γ-sterilised are available on request.
Plastic dispersing heads: Autoclavable. Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.
Type addition EC (STANDARD DISPERSING HEADS): The universal geometry uses two rows of teeth, is suitable for a large spectrum of laboratory applications, and it is reliable and efficient.Type addition BEC: High-turbulence mixing head, suitable for suspension of solid particles and for high viscosity applications.Type addition W: Dispersing head for fibrous and tough materials.Type addition SYN (SYNTHETICS): Disposable dispersing heads for theprocessing of multiple samples per day, where the required sterilization of stainless steel dispersing heads represents a significant time limitation. Available in PES / Special POM. Sterile packed.Type addition E: Coupling type EType addition F: Coupling type F*sterile
Powerful motor for the best stirring, dispersing, grinding and homogenisation results, especially suitable for safe processing of infectious, toxic or odour-intensive samples.USB interface for experiment control and documentationCollecting tray for protection against leaking liquidsSimple, precise and multilingual menu navigation with OLED displayProgrammable sample conditions (library)Tubo button for short-term, intensive mixing, dispersing and grindingAdjustable reverse operationScope of supply: Device, removal hook, plastic hose for drainage, USB cable, power adapter
Powerful dispersing instrument for volumes from 0.25 to 30 l (H2O) with digital speed display. It offers a wide speed range from 600 to 10000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.Digital speed displayElectronic speed controlElectronic overload protectionStainless steel dispersing elements can be cleaned quickly and easilySmooth startError code displayDispersing heads must be ordered separately.
HS 1200 E: Holder for the support of drive, transformer, four dispersing aggregates and two tools.ST-P 13/320: Stainless steel plate stand with anti-slip mat made of silicone, with height-adjustable holder for the drive and for fastening the base station.ST-P 01/200: Stainless steel joint stand (gas spring) with two rivet plugs for safe fixing of the basic station The drive holder can be rotated in any direction, raised and lowered.ST-P 15/320: Stainless steel plate stand with height-adjustable holder for drive support and for safe fixing of the basic station.ST-P 20/600: Plate stand with two rod design. Height adjustable.ST-P 10/600: Plate stand with one rod design. Allows easy and safe height adjustment of the drive unit. Material: AluminumST-F 10/600: H-foot stand made of anodized aluminum and the height adjustable, swiveling PTFE-coated work table with vessel holder. Material: AluminumST-P 14/590+500: Electric plate stand with lifting telescopic bar for more ease of use. Incl. up/down button and mat to prevent slipping. Stroke 500 mm. The electronics are designed for ambient temperatures of +5°C to +40°C and were tested per EN 60335-1 and UL 962.ST-P 21/700: Stainless steel plate stand with two rod design. Height adjustable. For more safety, the drive unit cannot be twisted sidewise or rotated.*with optional adapter
Cost effective dispersing unit for applications with operating volumes up to 10 liters. The powerful motor is useful for sample preparation and also for formulation in scale-up matters. More than 30 dispersion aggregates with different geometries, designs, sizes, materials and coatings are available for selection. The electronic control system continuously compares the pre-selected rpm speed with the actual speed and adjusts it so that the speed remains constant even as the viscosity increases.Aggregate tip speeding up to 34 m/sSoft start to prevent splashing of homogenate from sample vesselIntegrated overheating, overload and blocking protectionSpeed remaining constant even when viscosity changesAggregate replacement using one-handed quick-release coupling (type F)Insulated motor housing keeps motor noise to a safe, approved level during operationVarious models of EasyClean dispersing aggregatesApplications: General homogenisation applications (dispersion and emulsification), Formulation of lotions, creams and food, Production of oil-water emulsions, Dispersion of small quantities from plants, animals or human tissueStand and Dispersing heads must be ordered separately.
High-performance homogeniser with electronic speed control and a large variety of dispersing heads for many fields of applications. In combination with an IKA laboratory reactor it is also possible to conduct dispersion tasks under vacuum or pressure.Quick and easy cleaning of the dispersing tools, no disassembling requiredBrushless motor guarantees dust-free and silent operationUSB interface for control and documentation via labworldsoft®Timer/counter functionIncreased safety through tool recognition and IP-CodeDispersing heads must be ordered separately. All existing S 25 dispersing elements are compatible with T 25 easy clean digital.
Easy to clean dispersing head made of stainless steel (AISI 316) and ceramic. Ultimate fineness: emulsions 1µm to 10 µm and suspensions 10 µm to 50 µm, sterilisable by all methods.S 25 EC-T-C-25G-ST, S 25 EC-T-C-25F with integrated temperature sensor.