Grinding balls, hardmetal tungsten carbide
CHF 1,033.00*
Content:
1
Delivery according to order confirmation
Product number:
9738584
Manufacturer:
Fritsch GmbH
Packaging information:
Description
Grinding balls are available in different materials.
Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Properties
| Manufacturer Article Number: | 55.0400.08 |
|---|---|
| Material: | Tungsten carbide |
| UNSPSC: | 41-10-17-01 |
| Ø: | 40 mm |
Skip product gallery
From
CHF 6.30*
From
CHF 30.50*
From
CHF 3.10*
From
CHF 9.10*
Other customers also bought
Fritsch GmbH
Fritsch GmbH
Grinding balls, zirconium oxide
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Fritsch GmbH
Fritsch GmbH
Grinding balls, sintered corundum
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1mm to 3mm (to achieve a fineness down to the nanometer-range).
Fritsch GmbH
Fritsch GmbH
Grinding balls, hardened, stainless steel
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Fritsch GmbH
Fritsch GmbH
Grinding balls, agate
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Skip product gallery
Grinding balls, zirconium oxide
From
CHF 6.30*
Grinding Jars for Mixer Mill MM 400
From
CHF 656.00*
Knife mill HM100
From
CHF 5,115.00*
Batch mills Tube Mill control / Tube Mill 100 control
From
CHF 2,714.00*
Accessories for knife mill PULVERISETTE 11
From
CHF 70.80*
Similar products
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
With screw cap.Simple and safe handlingDust and air-tightSuitable for wet and cryogenic grinding
The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.For soft, elastic, fibrous, aqueous, oily or fatty samplesElectronically controlled speedSamples are grinded in only 10 to 30 secondsUp to 700 ml sample volumeAutoclavable grinding vesselsGrinding vessels available in various materialsCutting knives with 2 stainless steel and titanium blades availableEasy operationQuick startCoarse and fine grinding in one stepInterval, reverse and manual mode availableScope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knife
Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid.Clearly arranged, multilingual OLED-displayUSB interface for control and documentation of all the parametersInterval operation availableStepless adjustable speedAdjustable safety speed and timeProgrammable and storable test conditionsReproducible test resultsTimerEasy operation with touch keypadDust proof sealed housingQuiet operationScope of supply:Tube Mill control: incl. 1 x grinding chamber MT 40 and MMT 40.1 eachTube Mill 100 control: incl. 1 x grinding chamber MT 40, MT 100 and MMT 40.1 each
Grinding vessels in further materials, sickle knives with different cutting edges and various materials, single-use grinding vessel as well as further accessories are available.