Heat transfer liquid Ultra 350
CHF 532.00*
Content:
1
Delivery according to order confirmation
Product number:
6091099
Manufacturer:
Lauda Dr.R.Wobser GmbH & Co.KG
Packaging information:
Weight:
5 kg
Description
Heat transfer liquid based on mineral oil. Ideal for applications in open and closed temperature control circuits.
Not suitable for use with EPDM tubing.
- Temperature range for open systems: 30 to 200 °C
- Temperature range for closed systems: 30 to 350 °C
Not suitable for use with EPDM tubing.
| Hazardous Substance Data | |
| GHS | |
| Signal word | Gefahr |
| H-Satz | H304, H413 |
| P-Satz | P273, P301+P310, P331, P405, P501 |
| SDS | Link |
Properties
| Capacity: | 5 l |
|---|---|
| GHS: | GHS08 |
| Manufacturer Article Number: | LZB 107 |
| Max. temperature: | 350 °C |
| Media: | Mineral oil |
| Min. temperature: | 30 °C |
| Temperature: | 30 ... 350 °C |
| Type: | Ultra 350 |
| UNSPSC: | 41-10-37-15 |
Skip product gallery
Beakers, glass, jacketed, type T
From
CHF 153.00*
Temperature hoses, stainless steel 1.4404, triple insulation
From
CHF 406.00*
Tempering liquids for dynamic temperature control systems PRESTO
From
CHF 160.00*
Thermal fluids SilOil
From
CHF 675.00*
Bath fluid Polyclear Mix 30 Plus
From
CHF 195.00*
Tempering liquids
From
CHF 154.00*
Function upgrade for Huber circulators
From
CHF 1,053.00*
Similar products
DURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.
Temperature hoses with special triple insulation and two M16 x 1 connections. The ends are covered with silicone caps for protection. Max. pressure 6 bar (at 20 °C), 4 bar (at 350 °C).
Long-term tested for safe and reliable operation. Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
Huber thermal fluids are recommended because they have the best possible thermodynamic and environmental characteristics. Safe reliable operation relies on compliance with safety standards to ensure optimal results.Temperature ranges refer to use in closed systems.
Prevents premature rusting and the growth of algae. Ideal for use in circulators, water baths, shaking water baths or heating baths. For routine applications from 5 to 90 °C.
Long-term tested for safe and reliable operation.Low toxicityLow viscosityHigh stabilityAlmost odor-freeGood thermal conductivityLow corrosion susceptibilityWide temperature ranges
E-grade - innovative activation keys for the functionality to suit your budget and process requirementsEvery application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing. Application examples for E-grade® "Explore": Process and product development and optimisation Use-Tests of raw materials, quality control Enhanced data collection for scale-up trials
