In-line filters Midisart® 2000
CHF 167.30*
Content:
12
4 Available. Delivery time: 5-7 workdays
Product number:
9049156
Manufacturer:
Sartorius Stedim Biotech GmbH
Packaging information:
Length:
398 mm
Width:
181 mm
Height:
142 mm
Weight:
0.41 kg
Description
For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure).
- Stepped horse-barb of 6-12 mm on either sides
- sterile single packed filters, autoclavable
Properties
| Autoclavable: | Yes |
|---|---|
| Colour: | White |
| Connetion inlet: | Hose barb |
| Connetion outlet: | Hose barb |
| Feature: | Hydrophobic |
| Filter area: | 20 cm² |
| Manufacturer Article Number: | 17804----------E |
| Material membrane: | PTFE |
| Max. pressure: | 900 mbar |
| Max. temperature resistance: | 134 °C |
| Membrane Ø: | 0.62 mm |
| Pore size: | 0.45 µm |
| Sterile: | Yes |
Skip product gallery
LLG-Inline filters, PTFE
From
CHF 95.00*
In-Line-Filter, disposable, Polydisc TF™
From
CHF 216.00*
In-line filters Midisart® 2000 with NPT 1/8" connection
From
CHF 188.20*
In-Line Filter holder, PC
From
CHF 400.00*
Similar products
LLG-Inline filters with PP housing. The PTFE membrane is particularly suitable for filtration of aggressive chemicals, including acids and non-aqueous solutions. Also ideal for clarifying filtration of organic solutions, sterile filtration of gases, as well as sterile aeration and deaeration.Multiple autoclavable at 121 °C for 20 minutes at 2 bar, max. 3 cyclesHigh throughput with low pressure dropFor air and gases in both directions
Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm.Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.Hydrophobic PTFE membranePore sizes 0.1µm, 0.2µm, 0.45µm, 1.0µm1µm pore size unit has a PP prefilterAutoclavable at 131°C for 20 minutesMaximum operating pressure 4.0 barSuitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile.
For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance.Filter in either direction (3 bar max. pressure).sterile single packed filters, autoclavable
The filter holder made of PC is suitable for filtration of aqueous solutions. The bell-shaped base part protects the filtrate from contamination. Hose nipples can be replaced by Luer connectors to use as syringe filter holder.Suitable for Ø 50 mm filterConnection to peristaltic pump or pressure container possibleM 12x1 female threadMax. operating pressure 7 barAutoclavable