Ion-selective electrodes
CHF 1,117.00*
Content:
1
Delivery according to order confirmation
Product number:
6313274
Manufacturer:
Xylem Analytics Germany (WTW)
Packaging information:
Weight:
0.1 kg
Description
Combined ISE and GSE electrodes.
Properties
| Connection plug: | S7 plug head |
|---|---|
| Ion concentration (ISE): | 0.01 ... 23000 mg/l Na+ |
| Manufacturer Article Number: | 106649 |
| Max. temperature: | 80 °C |
| Membrane: | Glass |
| Min. temperature: | -10 °C |
| Shaft length: | 120 mm |
| Shaft Ø: | 12 mm |
| Temperature: | -10 ... 80 °C |
| Type: | Na 800/S7 |
Skip product gallery
Ion selective, gas-sensitive electrodes
From
CHF 645.00*
Ion selective combination electrodes perfectION™
From
CHF 890.00*
Fluoride electrodes
From
CHF 1,220.72*
High performance ammonia ISE Electrode
From
CHF 1,307.42*
Ammonia gas sensing ISE Electrode
From
CHF 1,250.22*
Similar products
Modular half cell with exchangeable diaphragm and S-7 plug head for determining the concentration of individual ions in aqueous solutions. Easy to use and require comparatively low expenditure on apparatus thereby offering advantages over wet chemistry and instrument analysis methods. Ion selective electrodes must be used in conjunction with a suitable reference electrode (InLab® Reference, cat no. 9.041 590 or InLab® Reference Plus, cat no. 9.041 591).
With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed.Scope of supply: Sensor with permanently connected 1.2 m cable with BNC connection, 60 ml reference electrolyte, operating instructionsScope of supply Na-electrode: Sensor with S7 plug head, diaphragm made of glass with higher sensitivity to sodium, 25 ml reference electrolyte, operating instructions
For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.
For high performance applications. Rapid results within one minute at concentrations from 1 ppm. Very good linear response.Scope of supply: Waterproof BNC connector, 1 m cable, 20 loose membranes, preassembled outer body and membrane cap, 2 x 60 ml bottles of electrode filling solution, spout cap, tweezers
Gas and ion selective electrode for determination of ammonia content in aqueous solutions. For rapid and precise measurement of ammonia.Scope of supply: Waterproof BNC connector, 1 m cable, 20 loose membranes, preassembled outer body and membrane cap, 2 x 60 ml bottles of electrode filling solution, spout cap, tweezers