LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A
CHF 28.10*
Content:
2
16 Available. Delivery time: 5-7 workdays
Product number:
4686205
Manufacturer:
LLG Labware
Packaging information:
Length:
536 mm
Width:
234 mm
Height:
88 mm
Weight:
0.145 kg
Description
Tall form. Conformity certified with batch ID.
- DIN EN ISO 4788
- With hexagonal base and spout
- Blue graduation
Properties
| Colour graduation: | Blue |
|---|---|
| Division: | 1.0 ml |
| Manufacturer Article Number: | 4686205 |
| Material: | Boro 3.3 |
| Nominal capacity: | 50 ml |
| Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): | Tall |
| Standard: | DIN EN ISO 4788 |
| Tolerance: | ±0.50 ml |
| UNSPSC: | 41121805 |
| With spout: | Yes |
Skip product gallery
Measuring cylinders, PP, tall form, class B, blue graduated
From
CHF 2.90*
Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated
From
CHF 10.30*
Measuring cylinders, DURAN®, tall form, class B, blue graduation
From
CHF 11.60*
Graduated cylinders, PP, tall form, class B, embossed scale
From
CHF 5.00*
Measuring cylinders, PP, tall form, class B, blue moulded graduations
From
CHF 5.40*
Measuring cylinder with plastic socket, DURAN®, class A, blue graduation
From
CHF 12.00*
Measuring cylinders, DURAN®, tall form, class A, blue graduation
From
CHF 14.30*
Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations
From
CHF 73.30*
Measuring cylinders, DURAN®, low form, class B, amber stain graduation
From
CHF 12.20*
Measuring cylinders, PMP, tall form, class A, blue graduations
From
CHF 13.00*
Similar products
Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.
Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website
IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.
With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788.
IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).
Silberbrand EternaDIN EN ISO 4788With spout and hexagonal footGraduations and inscriptions in Eterna permanent amber stainCalibrated to contain IN
IN (TC) calibrated. With spout and hexagonal glass base. Tolerances better than class B requirements. Short line graduation. With durable amber stain graduation, DIN EN ISO 4788.
Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60 °C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier's website.DIN 12681 and ISO 6706DE-M markingWith blue printed graduations and inscriptions