Laboratory regulator series KM-RX1000
CHF 761.00*
Content:
1
2 Available. Delivery time: 5-7 workdays
Product number:
7619815
Manufacturer:
ISOHEAT GmbH
Packaging information:
Length:
214 mm
Width:
213 mm
Height:
135 mm
Weight:
1.19 kg
Description
LabHEAT®-Regler. Mikroprozessorgesteuertes Tischgerät mit Stativklemme, Soll- und Ist-Wert-Anzeige im stabilen Kunststoffgehäuse, frei einstellbarer Regelbereich bis 1200 °C, PID-Selbstoptimierung, mit Rampenfunktion, USB-Anschluß, für externe Einstellungen, Eingang: Pt100 oder Thermolemente und potentialer Schaltkontakt. Ausgang: Heizung über Schuko-Steckdose mit allpoliger Absicherung, Schaltleistung max. 2300 W (10 A). Sensor-/Alarmanschluss: Diodenbuchse/Diodenbuchse.
Properties
| Depth: | 140 mm |
|---|---|
| Dimensions (WxDxH): | 205 x 140 x 75 mm |
| Height: | 75 mm |
| IP code: | IP 20 |
| Interfaces: | USB |
| Manufacturer Article Number: | 65001001 |
| Material housing: | Plastic |
| Max. temperature: | 1200 °C |
| Max. voltage: | 230 V·AC |
| Min. temperature: | 0 °C |
| Power supply: | 230 V·AC |
| Schaltleistung: | 2300 W |
| Temperature: | 0 ... 1,200 °C |
| Type: | KM-RX 1001 |
| Type of auxiliary energy: | Mains connection |
| UNSPSC: | 41-11-61-16 |
| Width: | 205 mm |
Skip product gallery
From
CHF 810.00*
Andere Kunden kauften auch
ISOHEAT GmbH
ISOHEAT GmbH
Laboratory regulator series KM-RX1000
LabHEAT®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, metal housing (H x W x D) 75 x 205 x 140 mm with fixed support clamp, switching power max. 2300 W (10A), 1.5m power supply (earthed) cable with plug. Nominal voltage 230 V AC.
Skip product gallery
From
CHF 99.10*
Zubehör
ISOHEAT GmbH
ISOHEAT GmbH
Temperature sensors for Laboratory regulator series KM-RX
LabHEAT®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mmKM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mmFurther models available on request.
Skip product gallery
Electronic heating mantles HM-200
From
CHF 564.00*
Standard heating mantles series KM-G
From
CHF 447.00*
Metal-cased heating mantles series KM-ME, with controller
From
CHF 242.00*
Electronic multi-size heating mantles HM-200-V, V-shaped
From
CHF 619.00*
Standard heating mantles series KM-GF
From
CHF 656.00*
Standard heating mantles series KM-GH
From
CHF 679.00*
Metal-cased heating mantles series KM-M, without controller
From
CHF 440.00*
Metal-cased heating mantles series KM-MNB
From
CHF 629.00*
Electronic stirrer mantles SHM-200 series
From
CHF 1,471.00*
Multi-size Heating Mantles, series KM-MPE for different sized round bottom flasks
From
CHF 664.00*
Similar products
Polypropylene outer case is resilient and chemically resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. The flexible heating element is suspended in a thermal insulating cartridge to provide maximum heat transfer with minimum risk of flask breakage. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.
LabHEAT®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60 mm bottom out-let from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom). Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.
LabHEAT®-Heating cover for reaction vessels. Flexible glass yarn heating element, outer jacket in glass silk, with Ø 60 mm bottom outlet from 500 ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone and RCD (residual current detection.
LabHEAT®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection).
LabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection).
LabHEAT® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection)..
Built-in adjustable heater control up to an element temperature of 450 °C and magnetic stirring control up to approx. 520 rpm with auto-reverse facility and automatic stirrer bar trap; the stirrer unit has an independent power supply. Polypropylene outer case is resilient and chemically-resistant. Even at full power output, the exterior remains ''cool-to-touch'' due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks.Spare heater cartridges are available on request.
LabHEAT®-Heating mantles for flasks, round bottom. Designed and technically identical to series KM-ME, but can be used for round flasks of three different sizes, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection), equipped with a controller which allows a continuous adjustment of power.