Maintenance kits for rotary vane pumps
CHF 298.50*
Content:
1
Delivery according to order confirmation
Product number:
6238866
Manufacturer:
Vacuubrand GmbH & Co.KG
Packaging information:
Length:
153 mm
Width:
152 mm
Height:
65 mm
Weight:
0.265 kg
Description
Properties
| For: | RE8/9-RZ9/16 |
|---|---|
| Manufacturer Article Number: | 20649988 |
| UNSPSC: | 40151502 |
Skip product gallery
Rotary vane pump RZ 6, two-stage
From
CHF 3,610.00*
Rotary vane pumps Complete packages Basic CRVpro 2/4/6/8
From
CHF 3,150.00*
Rotary vane pump CRVpro 4/6/8
From
CHF 3,291.00*
Rotary Vane Vacuum Pump RC 6
From
CHF 6,790.00*
Similar products
The powerful rotary vane pumps are ideal for laboratory and process applications that require a very good ultimate vacuum at medium to increased gas flow rate. Typical applications are lyophilisation, fine vacuum distillation, and drying chambers.High flow rate even at vacuum levels approaching ultimate vacuumHigh water vapor tolerance due to efficient gas ballastVery good ultimate vacuum even with gas ballastVacuum-tight at switch-off without suction nozzle valveLong oil change intervals due to large usable oil volumeEasy maintenance due to telescopic designScope of supply: Rotary vane pump, manual
The Welch CRVpro pumps are high-performance two-stage vacuum pumps. They impress with their long service life, high reliability and low maintenance requirements. The CRVpro series are the perfect partners for freeze dryers, vacuum concentrators, Schlenklines, glove boxes and vacuum ovens, as well as industrial applications.Cool running operation for less oil consumptionCoated oil case to slow metal corrosionExtended oil change intervals for less maintenance costsDual voltageScope of supply: Every pump is supplied complete with Directorr™ Premium vacuum pump oil, centering rings, clamping rings and motor overload protection.Scope of supply: CRVpro rotary vane pump, oil mist separator AKD 16, 2-way valve, hose connector, vacuum hose (1.5 m), oil drain kit
The Welch CRVpro pumps are high-performance two-stage vacuum pumps. They impress with their long service life, high reliability and low maintenance requirements. The CRVpro series are the perfect partners for freeze dryers, vacuum concentrators, Schlenklines, glove boxes and vacuum ovens, as well as industrial applications.Cool running operation for less oil consumptionCoated oil case to slow metal corrosionExtended oil change intervals for less maintenance costsDual voltageScope of supply: Every pump is supplied complete with Directorr™ Premium vacuum pump oil, centering rings, clamping rings and motor overload protection.
The Rotary Vane Vacuum Pump RC 6 has been designed to minimise the adverse effects of condensable and corrosive vapours. Its main components are a two-stage rotary-vane pump and a two-stage chemistry diaphragm for optimised corrosion resistance. The diaphragm pump continuously evacuates the oil reservoir of the rotary-vane pump in order to keep the partial pressures of solvent vapours, oxygen and corrosive gases at a low level and/or below their condensation point. The RC 6 is a low-maintenance pump for freeze-drying and other applications requiring an ultimate vacuum in the 10-3 mbar range.Scope of supply: Pump, overload circuit breaker and mains cable (2 m), centering and clamping ring for inlet, particulate filter, operating instructions, oil (bottle of 500 ml)Country-specific power cord versions available on request.