Mesh, Polyamide
Schwegmann Filtrations-Technik
CHF 107.00*
Content:
1
Delivery according to order confirmation
Product number:
9068295
Manufacturer:
Schwegmann Filtrations-Technik
Packaging information:
Length:
322 mm
Width:
173 mm
Height:
50 mm
Weight:
0.165 kg
Description
Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40 °C to 115 °C. In water from 95 °C to 100 °C. Stability in acids is limited and dependent on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102 cm, Length: 1 m
Other sizes available on request.
Other sizes available on request.
Properties
| Manufacturer Article Number: | SG00001035 |
|---|---|
| Material: | PA |
| Max. temperature resistance: | 115 °C |
| Mesh size: | 400 µm |
| Min. temperature resistance: | -40 °C |
| Temperature resistance: | -40 ... 115 °C |
Skip product gallery
Analytical Sieve Test Sand
From
CHF 84.60*
Test Sieves, 200 x 50 mm
From
CHF 158.00*
Test Sieves, 200 x 50mm, ASTM E 11
From
CHF 158.00*
Test sieves, 200 x 50 mm
From
CHF 176.00*
Test sieves, 203 x 50 mm
From
CHF 169.00*
Test Sieves, 200 x 25 mm
From
CHF 158.00*
NEXOPART Test sieves, 200 x 50 mm
From
CHF 109.00*
Test sieves, polyamide, 200 x 45 mm
From
CHF 260.00*
Similar products
Test materials can be used to check analytical sieves between the schedulded calibration dates and to demonstrate the presence of the required properties, as well as the suitability of analytical sieves. A test material for analytical sieves with frequent mesh widths ( 2.0mm - 1.0mm - 0.5mm - 0.25mm - 0.125mm ).Pack of 3 bottles, 202g eachGrain size : from 0.125mm to 2.00mmData sheet for the use of traceability for analytical sievesEach bottle contains a mixture of different sizes.
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sievePreviously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieve
Frame and mesh made of stainless steel, according to ISO 3310-1, with compliance certificate. Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.
Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1
Frame made from POM, sieve fabric made from polyamide according to ISO 3310-1 with a compliance certificate. Further mesh widths also according to ASTM on request.