Micro pestles, CTFE / stainless steel | For volume ml: 15
CHF 197.00*
Content:
1
Delivery according to order confirmation
Product number:
6288264
Manufacturer:
DWK Life Sciences GmbH (Kimble)
Weight:
0.07 kg
* Specifications refer to the packaging unit
Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).
| Dual Use: | 0 |
|---|---|
| For volume ml: | 15 |
| Manufacturer Article Number: | 749515-1500 |
| Pestle length mm: | 210 |
Other customers also bought
DWK Life Sciences GmbH (Kimble)
Disposable Pellet pestles, PP, with reaction tube
Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with reaction tube, except Cat. No. 9.314 492 and 9.314 493.
Similar products
Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes
DWK Life Sciences GmbH (Kimble)
Disposable Pellet pestles, PP, with reaction tube
Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with reaction tube, except Cat. No. 9.314 492 and 9.314 493.
Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:Pestle "A" for pre-grindingPestle "B" for fine grindingSpare components are available and are completely interchangeable.* Mortar length (mm)
Glass. Suitable if the nuclei are to be maintained after homogenising.Pestle "A" for pre-grindingPestle "B" for fine grinding
For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm
For safety grinding of any cells by minimal temperature rising. Closed System (CS) for minimizing the risk of personal contact with aerosols and sample overflow while grinding. Optimal contact of grinder and conical sample tube (15 or 50ml) to grind each cell in the best way.Each unit is gamma sterilized and comes with a fully assembled pestle , conical sample tube (PP), solid top cap (HDPE) and label.Type CS1: Tip from glass-filled PP (30%/70%) for standard grindingType CS2: Vitrified tip (cast silica) for harder grinding
Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.Large stability, vibration-free due to robust 3-fold stand construction4-digit display for reproducible homogenisationEasy handlingSteplessly adjustable, electronic speed control from 40 - 3000 min-1 High torque drive, powerful even at low speedsFlexible useLarge selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be usedUse of Eppendorf® microreaction vessels with 1.5 ml possibleChuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diametersFor optimum cooling, the cooling vessel can be filled with ice or ice waterSupplied with: schuett homgenplus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.
With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.