Optical D.O. Sensor FDO® 925

Optical IDS D.O. sensor for portable MultiLine^® IDS and InoLab^® Multi IDS benchtop meters. Measures the dissolved oxygen according DIN ISO 17289:2014-12. For applications in the lab and in process, outdoor and waste water treatment plants. Low maintenance (t99 < 60 s). No oxygen consumption, with inclined membrane for avoiding air bubbles. Factory calibrated membrane with smart chip. Built-in NTC 30 kOhm temperature sensor.

Cable length:	1.5 m
Concentration:	0 ... 20 mg/l (20 °C)
Connection plug:	Digital
Manufacturer Article Number:	201300
Material shaft:	POM
Max. temperature:	50 °C
Min. temperature:	0 °C
Partial pressure:	0 ... 400 mbar (20 °C)
Saturation:	0 ... 200 % (20 °C)
Shaft length:	150 mm
Shaft Ø:	15.3 mm
Temperature:	0 ... 50 °C
Temperature sensor:	NTC 30 kOhm
Type:	FDO® 925

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Cable length	Connection plug	Manufacturer Article Number	Type

Similar products

Changing cap for Optical D.O. Sensor FDO® 925

From CHF 360.00*

Flow-Through vessels

Flow vessels for conductivity measuring cells for applications to prevent air from entering or measurements in closed circuits. Flow vessels for conductivity measuring cells are perfectly designed to perform measurements without the interference of carbon dioxide through the air or to examine the conductivity of solutions in closed circuits. Important: The overpressure in the system must not exceed 0.5 bar.D 3Sen: Designed for everybody who has to perform flow-through measurements in the field, i.e. ground water pumping tests. It consists of a rugged flow-through vessel in holder and a tripod , also suitable for pole mounting. With hose fittings for standard hoses with a diameter of 3/4" (19 mm). Three places are available for pH/ORP, conductivity and dissolved oxygen sensors (CellOx/FDO). Including mounting accessories.

From CHF 234.00*

Electrolyte solution for dissolved oxygen electrodes

From CHF 94.30*

Accessories for Oxi

Suitable for all laboratory and field electrodes except StirrOx® G.

From CHF 41.40*

Stirring aid for Oxygen Sensor CellOx® 325

For constant stream (used with a magnetic stirrer).

From CHF 201.00*

Analog electro-chemical D.O. sensors TriOxmatic®

D.O. sensors with continuous measuring accuracy. Selction of models with an automatic self diagnosis system, a shorter response time and different cable lengths. All models are supplied with accessories box and can be connected to the monitor Oxi 298 (exception: TriOxmatic® 700).TriOxmatic® 700: For biological cleaning steps (wastewater treatment plants).With automatic self diagnosis SensReg (electrolyte consumption) and SensLeck (membrane monitoring). Medium response time of t90 < 180 s. Only available as retrofit fitting for analog converters of the Ecoline® and QuadroLine® series. Digital version still available (IQ Sensor Net System 181).TriOxmatic® 690: For measuring tasks in wastewater/water. Economic model without self diagnosis.TriOxmatic® 701: With increased resolution for the measurement of residual oxygen in the denitrification. Based on the increased resolution, a shorter response time (t90 < 30 s) and the thinner special membrane, this sensor can be used for quicker response processes with lower O2 concentrations.Scope of supply: Sensor incl. accessories box with membrane heads, electrolyte solution, cleaning solution, cathode cleaner

From CHF 2,529.00*

Accessories for D.O. Sensors TriOxmatic®

From CHF 234.00*

Oxygen sensor InLab® 605 / InLab® 605-ISM

Sensor for polarographic oxygen measurement with high accuracy and repeatability. For use in laboratory, field and industry. Robust construction. Diaphragm mechanically protected by steel mesh, shaft made of glass-fibre reinforced PPS. With integrated temperature sensor.InLab® oxygen sensors are designed for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 6 metersInLab®-ISM oxygen sensors are equipped with Intelligent Sensor Management, which enables simple calibration in the air and permanent monitoring of the sensor statusDesigned for use with the SevenExcellence™ multi-channel tabletop meter and the portable SevenGo™ 68 dual-channel instruments.

From CHF 1,260.00*

D.O. sensor LE621

For Dissolved oxygen meters FiveGo™ FG4. Galvanic sensor with integrated temperature sensor NTC 30 kOhm for the measurement of dissolved oxygen.

From CHF 580.00*

Oxygen sensor DurOx® 325

For use with Oxi 3xxi, ProfiLine Oxi 1970i, ProfiLine 3205, 3210, 3310.Membrane-covered oxygen sensor with low flow requirement and removable cage guard, for field applications (fish farm revival pools) and for educational purposes.Ready to measure - no polarisation timeIMT compensation via two integral temperature sensorsService life with one electrolyte filling approx. 6 monthsMinimal flow requirementNo zero currentSensor is watertight (IP 68 - 2)Standard with 3m cable and watertight plugStandard with calibration/storage vessel OxiCal® -DStandard with cage guard SK-D

From CHF 924.00*