Paper roll for Printers MP-800D / 660-101

Capillary tubes for melting point analysis. Clear glass, different diameters and lengths. Special remarks are available. Other sizes on request.

Supplied with 100 melting point tubes, open one end.With BioCote, silver-based, antimicrobial protection.SpecificationMP-200D / MP-200D-HRNumber of samples:2Temperature range:Ambient to 300ºCTemperature accuracy:± 1.0ºC at 20ºC, ± 2.5ºC at 300ºCDisplay:Three digit LED / Four digit LEDDisplay resolution:1ºC / 0.1ºCDisplay hold facility:No/ YesRamp rates:20ºC per minute to plateau, 2ºC per minute to melt / 20ºC per minute to plateau, variable between 1 and 10ºC per minute to meltDimensions (w x d x h):160 x 220 x 170mmNet weight:1.8kgElectrical supply:230V, 50Hz, 75W

Capillary tubes are made of borosilicate glass. A partial immersion thermometer, calibrated for 75 mm, is specified in most methods for the determination of melting points.

Very easy to use. Various characteristics can be observed simultaneously. Linear temperature scale adjustment. Enables quick identification of organic substances. Supplied with test and standard material sets. CE marked.Dimensions (W x D x H):430 x 100 x 140mmTemperature range:+50 to +260 °C

High Purity range compatible with all Melting Point Instruments. Tested on a high specification melting point apparatus. Shelf life of 3 years (from date of manufacturing). Available as Single Melting Point Standard or as a Set of 3 different Standards. Glass bottles of 1 g. Sets include 3 bottles of 1 g.

Accurately and reliably determining the melting point of up to three samples simultaneously.The MP-800D has a custom designed user interface based on an established Android platform for intuitive setup and navigation. All operation is via the 7" colour touchscreen. Once programmed, users can leave the MP-800D to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.A generous 8 GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC or can be printed directly from the unit via the accessory printer.The MP-800D features a useful storage drawer to house all standard capillary tubes.All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP.Accurately and reliably determining the melting point of up to three samples simultaneously.The MP-800D has a custom designed user interface based on an established Android platform for intuitive setup and navigation. All operation is via the 7" colour touchscreen. Once programmed, users can leave the MP-800D to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.A generous 8 GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC or can be printed directly from the unit via the accessory printer.The MP-800D features a useful storage drawer to house all standard capillary tubes.All units are factory supplied with a calibration certificate showing individual serial number for traceability. The SMP50 also conforms to Pharmacopeia and GLP.SpecificationsNo of samples:3 simultaneouslyTemperature range:Ambient to 400 °CTemperature resolution:0.1 °CDisplay:7'' HD ColourRamp rates:0.1 to 20 °C in 0.1 °C incrementsTemperature sensor:PT1000 Platinum resistanceMemory:8 GB (approx. 300 results with video)Cool down time:350 to 50 °C (approx. 12 min)Heat up time:50 to 350 °C (approx. 6 min)Data transfer:USB Flash driveSample level:2 to 3 mm in 50 mm or 100 mm length capillariesWeight:4.6 kgPower supply:120-230 V, 50/60 Hz

The MP-400D can take three samples simultaneously within the optimised heating block. To allow maximum flexibility a plateau facility is included with variable ramp rate between 0.5 and 10°C in 0.1°C increments. The tubes are illuminated with bright white LED's to give the clearest view of the samples during the melt. The block has been designed for easy access for cleaning. To allow the most comfortable viewing angle the MP-400D features a two stage head adjustment. The MP-400D features the patent pending head up display, this unique feature displays a floating image of the block temperature, visible through the eyepiece, in front of the tubes.Maximum temperature 400°CPatented head up displayIntegrated cooling 350°C to 50°C in 12 minutesLarge easy to read user friendly interfaceAn accessory printer is available separately to produce a written record of the melt.SpecificationsNo of samples:3Temperature range:Ambient to 400°CTemperature resolution:0.1°CDisplay:40 x 4 segment LCDRamp rates:0.5 to 10°C in 0.1°C incrementsMemory:7 results per tubeDate/time display:YesCool down time:350 to 50°C (~12 mins)Heat up time:50 to 350°C (~ 6 mins)Supply requirements:120V / 230V 50HzLanguage variants:English, German, French, ItalianTemperature unit:°C

With the MPM-V01, substances with a melting point of up to 340 °C can be analysed quickly and easily. During the measurement, the progress of the transparency is shown on a progress bar in the display. Substances can be entered and stored with the corresponding start value in the database (Excel) on the SD card, which can be expanded as required, to enable routine measurements to be carried out more quickly. The device stores 10 measurement results that are not deleted even after switching off. Alternatively, measurement results can be temporarily stored on the SD card in csv format. All measurement data can be transferred to a computer and added to a measurement report using the PC software, and can also be saved as a PDF file.Colour touch display1 capillary intakeCapillary drops and centres automaticallyFor melting point tubes with 1.4 mm outer diameter and 80 mm lengthAdjustable heating rateDisplay of start temperature, melting point, and graphic of transparency progression after measurementSD memory card functionFast cooling by integrated fanOptionally, a printer can be connected for easy documentation of the measured values. Please order separately.Scope of supply: Melting point meter, USB cable, PC software, SD memory card, mains cable, 100 melting point tubesSpecificationsMeasuring range:40 ... 340 °CAccuracy:±0.3 °C (40 ... 200 °C), ±0.5 °C (200 ... 340 °C)Heating rate:0.5 / 1 / 2 / 3 / 4 / 5 °C/minDimensions (W x D x H):275 x 285 x 125 mmWeight:3 kgPower supply:100 ... 240 VIP code:IP 20