Photometer MD50
CHF 595.00*
Content:
1
Delivery according to order confirmation
Product number:
4700111
Manufacturer:
Tintometer GmbH
Packaging information:
Description
Scope of supply: Photometer, 3 x 24 mm round glass cuvettes with lid and sealing ring, screwdriver, 3 x stirring rods, 10 ml syringe, cleaning brush, USB-C to USB-A cable, carrying case, 2 x AA batteries, operating instructions, reagents (depending on variant)
| Hazardous Substance Data | |
| Signal word | Achtung |
| H-Satz | EUH210, EUH031, H317 |
| P-Satz | P261, P280, P302+P352, P333+P313, P363 |
| SDS | Link |
Properties
| Battery/rechargeable battery: | 2 x AA |
|---|---|
| Depth: | 155 mm |
| Designation ANSI: | AA |
| Dimensions (WxDxH): | 76 x 155 x 45 mm |
| Height: | 45 mm |
| IP code: | IP 67 |
| Illuminants: | LED |
| Manufacturer Article Number: | 280205 |
| Measured range: | 0,05 ... 5 mg/l Cu (Kupfer, Pulverreagenz) |
| No. of batteries/rechargeable batteries: | 2 |
| Photometric accuracy: | ±3 % FS |
| Photometric measuring range: | 0 ... 3 Abs |
| Type: | MD50 |
| Type of auxiliary energy: | Battery |
| Width: | 76 mm |
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
CHF 133.40*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
Tube tests NANOCOLOR® Zinc
From
CHF 138.70*
pH electrodes, starter kit, for PrimeLab 2.0
From
CHF 758.00*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
For pH measurements of water solutions in research, environmental monitoring and quality control.With integrated temperature sensorNot refillableAutomatic recognition of connected electrodesSynchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual