For cryoboxes 133 x 133mm. With compartment heights and formats as indicated. Other sizes available on request.

Dimensions: 133 x 133 mm square. For the storage of samples. Made of cardboard, plastic coated. Without divider. With lid. Further sizes and colours available on request.

Robust design, autoclavable. With printed grid on lid for cryovials and similar tubes up to 13.5 mm diameter (except type 5026: up to Ø 12.5 mm). Temperature resistant from -196 to 121 °C. With grid numbers for reliable identification of individual samples.

Polypropylene box fits in standard freezer racks. Locate tubes is easily with moulded grid lines and a moulded reference point on the lid. Stores 1.5 ml to 2.0 ml microtubes under easy-open, friction-fit lid. Dimensions: 130 mm x 130 mm x 47 mm. Autoclavable.The set contains the colours blue, green, pink, yellow and orange.

The Matrix™ SepraSeal sealing mats are suitable for securely sealing sample tubes with or without 2D code. For sample access, the caps can be removed with the practical cap removal tool (Cat.-No. 6.254 390, please order seperately) or pierced once. The pre-slit versions are suitable for multiple piercing. The self-sealing function of the pre-slitted elastomer maintains sample integrity.For storage down to -20 °CIndividual closure or closure of 96 sample tubes simultaneously possibleGood chemical resistanceLow evaporation rateWith the Matrix™ DuraSeal sealing mat (Cat.-No. 4.658 312), sample tubes are permanently sealed. The sealing mat is pre-slit for sample access and has a v-shaped design. The special elastomer ensures that the integrity of the sample is maintained. Suitable for sample storage down to -80 °C.

The boxes are made of polypropylene and can be used in temperatures as low as -90 °C. The boxes are autoclavable at +121 °C for 20 minutes. The boxes have a fixed grid divider with 9x9 cells and are suited for 1.0 ml and 2 ml cryogenic vials. Cellcodes are printed on the lid for easy identification.

For cryoboxes 136 x 136mm. With compartment heights and formats as indicated. Other sizes available on request.

Freezer and cryogenic storage boxes (CryoBoxes). Dimensions: 136 x 136 mm square. For the storage of samples. Made of cardboard, plastic coated, without divider. With lid. Further colours available on request.

The racks can be used with all freezer models. They are available with or without cryoboxes.

Icecatch® cool packs for temperature sensitive products used in the pharmaceutical, biotech, medical and food industries. Icecatch® cool packs distinguish themselves through the following specific features:Reliable cold storage through the use of immobilised coolantFor repeat usage due to the use of robust PA/PE filmDisposal with the domestic trash due to the use of non-poisonous ingredientsUnobjectionable use in the pharmaceutical and food industriesPhase transition 0°CIcecatch®-Gel Spreading of heat absorption around the 0°C range through the use of immobilised cooling gelOptimal price / heat absorption capacity relationshipFilled with cooling gelIcecatch®-Solid Maximum dimensional stability during the freezing process through the use of hard foamFilled with hard foamIcecatch®-Solid Insulated 2 - 8 °CA perfect cool pack in combination with our System packaging for the +2 °C up to +8 °C transportMaximum dimensional stability during the freezing process through the use of hard foam, coolant and integrated isolation layerFilled with hard foam and isolation layer

Icecatch® cool packs for temperature sensitive products used in the pharmaceutical, biotech, medical and food industries. Icecatch® cool packs distinguish themselves through the following specific features:Reliable cold storage through the use of immobilised coolantFor repeat usage due to the use of robust PA/PE filmDisposal with the domestic trash due to the use of non-poisonous ingredientsUnobjectionable use in the pharmaceutical and food industriesPhase transition 0°CIcecatch®-Gel Spreading of heat absorption around the 0°C range through the use of immobilised cooling gelOptimal price / heat absorption capacity relationshipFilled with cooling gelIcecatch®-Solid Maximum dimensional stability during the freezing process through the use of hard foamFilled with hard foamIcecatch®-Solid Insulated 2 - 8 °CA perfect cool pack in combination with our System packaging for the +2 °C up to +8 °C transportMaximum dimensional stability during the freezing process through the use of hard foam, coolant and integrated isolation layerFilled with hard foam and isolation layer

Safely store vials from -196 to 121 °C for repeated use in mechanical freezers as well as liquid nitrogen. Boxes are designed with unique features to help the user orient, identify, and access vials with ease. The forward-sloped base and high-contrast, imprinted indexing on the transparent lid ensure quick visual orientation. Hinged lid allows easy one-handed access to samples. A built-in stop prevents the lid from swinging too far when the box is picked up by the lid, helping to prevent accidental spills. The 5 x 5 array box does not have hinged lid. All boxes include vent and drainage holes. Stackable. Autoclavable.

Polypropylene box fits in standard freezer racks. Locate tubes is easily with moulded grid lines and a moulded reference point on the lid. Stores 1.5ml to 2.0ml microtubes under easy-open, friction-fit lid. Dimensions: 130mm x 130mm x 47mm. Autoclavable.

The racks can be used with all freezer models. They are available with or without cryoboxes.

Made of cardboard, plastic coated. Without divider. Square. For the storage of samples. With lid. Further sizes and colours available on request.

For cryogenic storage of cryotubes.9 x 9 gridGrid numerically codedRemovable grid insertsHinge with safe snap-on lidStackableDrain bores at the bottom for dew liquidTemperature resistant from -90 to 121°CAutoclavable

Lid numerically coded. Temperature range -190 - 121 °C. Suitable for use with liquid nitrogen. Autoclavable. Stackable, with drain bores for dew liquids and nitrogen. Suitable for cryotubes wit a diameter up to 12.3 mm. Can also be used for larger vessels by removing the grid inserts.

Refrigerators and freezers specially designed for the storage of explosive and highly flammable substances. With comfort electronics and spark-free interior. The interiors of the units meet the safety requirements of the EU Directive 94/9/EC (ATEX 95) and are tested by the ATEX conformity assessment body electro-suisse (SEV).Precision electronic controller with digital temperature displaySelf-closing door with integrated lockVisual and audible temperature and door alarmVisual power failure alarm as well as sensor defect alarmIntegrated data memory with min/max temperaturesAlarm forwarding to an external remote warning systemRS 485 Interface for external documentation1-point calibrationMaximum temperature stability and consistency according to IEC 60068-3Access port for an external temperature sensorWith static cooling systemConvenient and comfortable drawers

The insulated boxes, in combination with the separately available Icecatch® cooling elements, are ideal for transporting temperature-sensitive products and samples.

Refrigerators and freezers specially designed for the storage of explosive and highly flammable substances. With comfort electronics and spark-free interior. The interiors of the units meet the safety requirements of the EU Directive 94/9/EC (ATEX 95) and are tested by the ATEX conformity assessment body electro-suisse (SEV).Precision electronic controller with digital temperature displaySelf-closing door with integrated lockVisual and audible temperature and door alarmVisual power failure alarm as well as sensor defect alarmIntegrated data memory with min/max temperaturesAlarm forwarding to an external remote warning systemRS 485 Interface for external documentation1-point calibrationMaximum temperature stability and consistency according to IEC 60068-3Access port for an external temperature sensorWith dynamic cooling systemFlexible, height-adjustable glass shelves

FreezerCell™ can be used for a variety of cell types, including stem cells, primary cells, cell lines and yeasts. The FreezerCell™ does not require any additives and only needs to be placed in an ultra deep freezer and the cooling runs at -1°C per minute. Fill the freezing aid with the cryotubes and freeze for approx. 3 hours at -80 °C. Then the samples are readyto transfer to a nitrogen tank. This gentle method ensures a high survival rate of the cells during the freezing process.No pre-cooling necessaryConsistent temperature distribution, even with partial loadingLid can be opened easily

Safely store samples using Microcentrifuge Tube Storage Boxes. High-temperature polyurethane foam insert securely holds 64 or 81 microcentrifuge tubes sized 0.2, 0.5 or 1.5 ml.bottom constructed in white and lid in transparent polycarbonatetemperature resistant from -135 to 121 °Cwith grid numbers for reliable identification of individual samples

The insulation boxes are suitable for the transport and storage of temperature-sensitive products.To maintain cold chainsStackableNeopor® is characterised by its high hot and cold thermal insulation properties, compressive strength, shock absorbing properties, low weight and insensitivity to moisture. In addition, it has infrared absorbers and reflectors that reduce thermal conductivity and give the box its silver-grey colour.

Intended for cryogenic transportation and storage of biological material. Available in different tube types. Conform to the IATA requirements for the transport of diagnostic specimens and to the US pharmacopoeia USP Class VI. Packed in resealable zip lock bags with printed catalog no. and lot. no. Pyrogen-free. Non-toxic. Sterile (SAL 10-6). Certified RNase- and DNase-free.Warning:Do not use CryoTubes in the liquid phase of liquid nitrogen unless correctly sealed in Nunc CryoFlex™ Tubing (Cat. No. 4.009 142). Improper use may cause liquified nitrogen to be trapped inside the vial and lead to pressure build-up, resulting in possible explosion or biohazard release.Intended for cryogenic transportation and storage of biological material. Available in different tube types. Conform to the IATA requirements for the transport of diagnostic specimens and to the US pharmacopoeia USP Class VI. Packed in resealable zip lock bags with printed catalog no. and lot. no. Pyrogen-free. Non-toxic. Sterile (SAL 10-6). Certified RNase- and DNase-free.Warning:Do not use CryoTubes in the liquid phase of liquid nitrogen unless correctly sealed in Nunc CryoFlex™ Tubing (Cat. No. 4.009 142). Improper use may cause liquified nitrogen to be trapped inside the vial and lead to pressure build-up, resulting in possible explosion or biohazard release.

For applications where the samples are either not stored in boxes or has odd sizes. The single trays, with lid and handle on the front, will fit into any freezer.

Rigid polyurethane container provides durability for chilling your temperature sensitive samples. Excellent insulation properties for ultra cold. Use with ice, dry ice and ice-salt slurries, etc. For low temperature use down to -196°C. Minimize evaporation loss with close fit lid. Easily remove with comfortable recessed knobs. Keyed lid and base fit together to conveniently store lid under base. With spout and ergonomic handles for safe handling. Stackable.*(diam. x H)

For storage of large samples and 15 and 50 ml tubes. One size box safely stores 15 and 50 ml tubes in LN2 or mechanical freezers. Choose from two partitions for your tube size. Colour white.

The ultra-low temperature freezers are suitable for stable long-term storage of sensitive samples at -90 °C and are characterised by low energy consumption, convenient operation, and individual safety concept.Powerful cascade compression cooling unitEnvironmentally friendly refrigerants R-290 and R-170Thermal insulation with unique long-life VIPs (vacuum insulation panels)Innovative door sealing concept reduces ice formationErgonomic door handleInterior completely made of stainless steelRemovable inner doors made of stainless steel3 flexibly positionable shelves made of stainless steelPotential-free alarm contact for in-house alarm systemInternal data logger, measured values can be read out in open format via USBEthernet interface2 access ports Ø 28 mm, rearThe ultra-low temperature freezers are suitable for stable long-term storage of sensitive samples at -90 °C and are characterised by low energy consumption, convenient operation, and individual safety concept.Powerful cascade compression cooling unitEnvironmentally friendly refrigerants R-290 and R-170Thermal insulation with unique long-life VIPs (vacuum insulation panels)Innovative door sealing concept reduces ice formationErgonomic door handleInterior completely made of stainless steelRemovable inner doors made of stainless steel3 flexibly positionable shelves made of stainless steelPotential-free alarm contact for in-house alarm systemInternal data logger, measured values can be read out in open format via USBEthernet interface2 access ports Ø 28 mm, rear

With star-shape in the screw cap, for automated capper/decapper.Temperature resistant down to -196 °C. Not appropriate for operations in liquid nitrogen. With marking area, fill line and graduations printed on the vial. Safe and precise handling of biotechnology materials. Bar-code printed on each tube. DNase/RNase free. Vials and caps are autoclavable at 121 °C.Homogeneous conception:All made from polypropyleneSingle-body, single-turn screw capPrinted graduations for accurate measurements. Large white area for writing specimen identification. Sterile.Packed in 2 bags of 50 tubes.For research and development only.

Blue. Safe storage and transport of cryogenic vials.Drainage holes in each wellAlphanumeric identificationTemperature resistant up to -196 °CAutoclavable

For storage of large samples and 15 and 50 ml tubes. For use in LN2 or mechanical freezers.

Robust design, autoclavable. Temperature resistant from -196 to 121 °C. With transparent PC lid, without grid.

Strong, high quality PU insulationCompact and robust cool boxesCover can be locked with carrier bracketRubber seal for airtight seal

DURAN®. DIN 12492. Dish-shaped. Generally for thermostatting round bottom flasks to a constant temperature as hot or cold baths. With structured aluminium casing and edge protection. Suitable for use with magnetic stirrers.

DURAN®. DIN EN ISO 16496. Cylindrical design with insulated lid, held by two spring clips and aluminium carrying handle. For cooling, storage and transport of small samples of temperature-sensitive goods e.g. with liquid nitrogen (LN2) or dry ice (CO2). When storing liquid nitrogen (LN2) or CO2 a hole (diam. approx. 2 mm) in centre of the lid is necessary that no overpressure can arise in the vessel.Blue-coated metal cover

For durable labelling of cardboard, plastic and cloth material for use at ultra-low temperatures. Non-smudge and non-running. Removable with alcohol. Extra fine point. Two packs available: 1 pack contains one each red, green, black and blue marker while the other pack contains black markers only.