Reinforced racks for BINDER chambers and incubators, stainless steel
CHF 583.00*
Content:
1
Delivery according to order confirmation
Product number:
6252772
Manufacturer:
BINDER GmbH
Packaging information:
Description
Inclusive fasteners.
Properties
| For: | FED 400 / M 400 |
|---|---|
| Manufacturer Article Number: | 8012-0346 |
| Material: | Stainless steel |
| Type of insert: | Insert grid, reinforced |
Skip product gallery
Growth chambers KBW, KBWF series | Type: KBWF 240
CHF 9,999.00*
Material test chamber FP series
From
CHF 4,042.00*
Constant climate chambers KBF-S ECO
From
CHF 14,797.00*
LED light bars Basic set
From
CHF 1,453.00*
LED light bars Expansion set
From
CHF 348.00*
Humidity Chambers HCP
From
CHF 9,846.00*
Similar products
Homogeneous lighting conditions with constant temperature and humidity conditions, the BINDER growth chambers. The responsive humidification system, the high-performance cooling and uniform light distribution ensure optimal growth conditions.KBW Series: Growth chambers with lightKBWF Series: Growths chambers with light and humidityEquipment:Electronically controlled APT.line™ preheating chamberTemperature range 0 °C to 70 °C (without humidity and illumination)Humidity range 10 % to 80 % RH (KBWF)Variable position illumination cassettes each with 5 daylight fluorescent illumination tubesController with time-segment and real-time programmingHumidity regulation with capacitative humidity sensor and vapor humidification (KBWF)Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmInterface: Ethernet, RS 485 (optional)
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canisters
Basic set consisting of 2 pieces, mounting material, control unit for max. 4 light strips, 100 to 240 V, 50/60 Hz.
Expansion set consisting of 2 pieces, attachment material: clips. For expanding the basic set of light bars.
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com