Rubber mats for Universal platforms

For:	Digital 68 kg Shakers
Length mm:	910
Manufacturer Article Number:	30400065
Width mm:	610

Clamps for IKA shakers and shaking incubators

Clamps for safe shaking of Erlenmeyer flasks.

From CHF 36.50*

Flask Clamps, stainless steel

Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.

From CHF 34.00*

Digital Orbital Shaker

Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties

From CHF 1,969.00*

Orbital shaker KM CO2, with ribbon cable

Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO2 concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.Timer 1 s to 99 h 59 min or continuous operationExternal control unit with digital display for operation outside the incubatorScope of supply: Shaker incl. basic platform with rubber mat and external control unitDue to the ribbon cable, a feed-through in the incubator is not necessary.

From CHF 2,950.00*

Platforms for Orbital Shakers MaxQ 416 HP / 420 HP

From CHF 2,542.00*

Accessories for shakers RS series

From CHF 6.70*

Fixing clip platform AS 501.4

For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.

From CHF 1,505.00*

Orbital shaker KS 260 control

Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.Attachments are not included - Please order separately.Separate digital speed and timer displays with operating mode indicationTimer: 1 min to 99 h 59 min or continuous operationControlled stop-point positioning function (enables use in automated robotic sampling routines)All functions can be controlled and documented using labworldsoft® softwareInterface: RS 232 / analogueSpecial variant with reverse rotation function available on request

From CHF 3,965.00*

Orbital Shaker PSU-20i

Powerful and efficient microprocessor controlled, multi-functional orbital shaker providing all that is required to mix your samples: rotation, reciprocation and vibration. This enables optimisation of the mixing whether in flasks, beakers, Petri dishes or other laboratory vessels.Orbital motion, orbital reciprocation and vibration functions all in one productReciprocal rotation: 0 to 360° turning angle, in 30 degree stepsVibration: 0 to 5° turning angle, 1 degree stepsLoading capacity: 8 kgFully programmable sequence that can use one or all the functions6 interchangeable platforms for vessels up to 1000ml including a multi-level platform to hold a large number of various microplates, Petri dishes and culture bagsTimer 1 min to 96 hScope of supply: Orbital Shaker PSU-20i, external power adapter, manual and certificateOptional Platform attachments please order separately.

From CHF 2,077.00*

Accessories for orbital shaker KS 130

AS 130.1 Universal attachment: Able to hold most types of container using adjustable tension rollers.AS 130.3 Petri dish attachment: For gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).AS 130.4 Test tube holder: For intensive vibrating of small tubes, test tubes, cuvettes, centrifuge tubes.

From CHF 134.00*