Sealing cap assemblies Nalgene™, PP
Product number:
9315733
Manufacturer:
Thermo Elect.LED GmbH (Nalge)
Packaging information:
Length:
18 mm
Width:
15 mm
Height:
7 mm
Weight:
0.004 kg
Description
PP screw cap with Tefzel® ETFE plug liner and viton O-ring. Leak-proof at recommended maximum speed and rcf for tubes. Suitable for working with aggressive chemicals. The 38mm assembly has a PP shoulder reinforcement ring to prevent collapsing of the 250ml bottles.
Tefzel® is registered trademark of DuPont.
Tefzel® is registered trademark of DuPont.
Properties
| Autoclavable: | Yes |
|---|---|
| Cap size: | 24 mm |
| For capacity: | 50 ml |
| Manufacturer Article Number: | DS3131-0024 |
| Material: | PP |
| Sealing of closure: | Sealing ring |
Skip product gallery
From
CHF 40.40*
Other customers also bought
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Sealing cap assemblies with silicone seal Nalgene™, PP
For Oak Ridge centrifuge test tubes made of PP, PC and polysulphone.
Skip product gallery
LLG-Centrifuge tubes economy, PP
From
CHF 122.00*
Centrifuge tubes, round bottom, AR glass®, ungraduated
From
CHF 0.30*
Centrifuge tubes Nalgene™ Oak Ridge, PPCO, with sealing caps, PP
From
CHF 15.40*
Centrifuge tubes, round bottom, DURAN®
From
CHF 6.30*
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
From
CHF 50.80*
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
From
CHF 24.00*
Centrifuge bottles Nalgene™, PP-copolymer
From
CHF 16.30*
Test and Centrifuge Tubes Falcon®, PS and PP, with graduation
From
CHF 169.40*
Centrifuge tubes, PP
From
CHF 11.10*
Similar products
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges (Cat. no. 9.315685 can be used up to 100,605 x g). PP sealing caps with silicone seal for additional leak protection when centrifugation at >10,000 x g or when centrifugation of hazardous substances.Round bottomGood mechanical strengthHigher chemical resistance than polycarbonateMultiple autoclavableLeak-proof
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
Tip
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
PP-copolymer with PP screw cap. Autoclavable.
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml)
Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.