Sound level meter class I and II | Type: SW 2000, class II
CHF 1,851.30*
Content:
1
Delivery according to order confirmation
Product number:
4676252
Manufacturer:
Kern & Sohn GmbH
* Specifications refer to the packaging unit
For measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter.
Scope of supply: Sound level meter, memory card, hard carrying case
- Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, E
- The optimised analogue frontend switch reduces the ambient noise and increases the linear measuring range
- Three profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weighting
- LN statistics and display of the graph showing the progression of time
- User-defined integral interval measurement up to a maximum of 24 hours is possible
- Frequency weighting (filter) A, B, C, Z
- Time interval during measurement: F (fast), S (slow), I (pulse)
- Freely-definable limits for the output of an optical alarm signal
- Peak Hold Mode to capture peaks
- Octavo function for targeted sound analysis
- Track function with graphic display of a measurement
- Calibration mode (with optional calibrator)
- Trigger mode: Analogue signal to switch the device on or off with 3.5 mm plug
- Automatic measurement for timer function is possible
- Measured value recording frequency selectable: 10, 5, 2 Hz
- Data transfer using MicroSD (4 GB), RS-232 or USB
- Option of fitting a column on the rear of the housing, ¼ thread
Scope of supply: Sound level meter, memory card, hard carrying case
Specifications | SW 1000 // SW 2000 |
Measuring capacity linear: | 20 ... 134 dB // 25 ... 136 dB |
Frequency range: | 0,003 ... 20 kHz // 0,02 ... 12,5 kHz |
Sensitivity: | 50 m V/Pa // 40 m V/Pa |
Type: | SW 2000, class II |
---|