Temperature Test chamber TTC256
CHF 28,425.00*
Content:
1
Delivery according to order confirmation
Product number:
9868011
Manufacturer:
Memmert GmbH + Co. KG
Packaging information:
Description
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.
Ventilation and Control:
Heating concept:
Cooling Concept:
Multiple Overtemperature Protection:
Ventilation and Control:
- high-performance air fan in working chamber
- depending on operation status automatically variable fan speed with manual adjustment from 10 % to 100 %
- adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
- autodiagnostic system with fault indication on temperature control
- 2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature value
- digital 7-day-programme-timer with real time clock, precise minute setting
- integral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
- digital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setup
- digital display of set values (resolution: 0.1 °C below 99.9 °C, 0.5 °C above 100 °C) and actual values (resolution: 0.1 °C) of temperature (LED)
- long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
- programme stored on power failure
- parallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentation
- USB interface including Memmert "Celsius" software for programming and documentation
- chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
- incl. works calibration certificate for -20 °C and 160 °C
Heating concept:
- high-performance ring heaters with optimised air circulation
- door heating to avoid condensate
Cooling Concept:
- twin compressor
- speed adjustable condenser fan
- refrigerant R449A
Multiple Overtemperature Protection:
- with audible and visual alarm in case of over-/undertemperature and open door
- independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3
- additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range
- mechanical temperature limiter TB class 1 switching the heating off at approx.10 °C above max. oven temperature
Properties
| Depth int.: | 597 mm |
|---|---|
| Ext. depth: | 1100 mm |
| Ext. height: | 1730 mm |
| Ext. width: | 898 mm |
| External dimensions (WxDxH): | 898 x 1,100 x 1,730 mm |
| Height int.: | 670 mm |
| Int. width: | 640 mm |
| Internal dimensions (WxDxH): | 640 x 597 x 670 mm |
| Manufacturer Article Number: | TTC256 |
| Material inserts: | Stainless steel |
| Material interior: | Stainless steel |
| Max. no. of inserts: | 6 |
| Max. temperature: | 190 °C |
| Max. voltage: | 400 V·3/N/PE |
| Min. temperature: | -42 °C |
| Nominal capacity: | 256 l |
| Power supply: | 400 V·3/N/PE, 50 Hz |
| Power supply frequency: | 50 Hz |
| Rated capacity: | 7000 W |
| Temperature: | -42 ... 190 °C |
| Type: | TTC256 |
| Type of auxiliary energy: | Mains connection |
| Weight: | 337 kg |
| With CO₂ control: | No |
| With timer: | Yes |
Skip product gallery
Growth chambers KBW, KBWF series | Type: KBWF 240
CHF 9,999.00*
Material test chamber FP series
From
CHF 4,042.00*
Constant climate chambers KBF-S ECO
From
CHF 14,797.00*
Humidity Chambers HCP
From
CHF 9,846.00*
Similar products
Homogeneous lighting conditions with constant temperature and humidity conditions, the BINDER growth chambers. The responsive humidification system, the high-performance cooling and uniform light distribution ensure optimal growth conditions.KBW Series: Growth chambers with lightKBWF Series: Growths chambers with light and humidityEquipment:Electronically controlled APT.line™ preheating chamberTemperature range 0 °C to 70 °C (without humidity and illumination)Humidity range 10 % to 80 % RH (KBWF)Variable position illumination cassettes each with 5 daylight fluorescent illumination tubesController with time-segment and real-time programmingHumidity regulation with capacitative humidity sensor and vapor humidification (KBWF)Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmInterface: Ethernet, RS 485 (optional)
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canisters
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com