Two prong clamps, cast steel
CHF 35.30*
Content:
1
12 Available. Delivery time: 5-7 workdays
Product number:
6237648
Manufacturer:
ISOLAB Laborgeräte GmbH
Packaging information:
Length:
251 mm
Width:
91 mm
Height:
20 mm
Weight:
0.192 kg
Description
Chrome plated cast steel with two PVC coated prongs for gently holding the objects. Two separately adjustable clamps enable perfect control of holding pressure and precise positioning of the objects. With a solid stem of 12 mm rod diameter, the holding angle and distance from the support rod can be adjusted by a separate bosshead.
Properties
| Clamping range: | 0 ... 50 mm |
|---|---|
| Manufacturer Article Number: | 045.01.001 |
| Material: | Cast steel |
| Max. clamping width: | 50 mm |
| Min. clamping width: | 0 mm |
| Shaft length: | 250 mm |
| Type of coating: | Chrome-plated |
| With bosshead: | Yes |
Skip product gallery
From
CHF 14.20*
From
CHF 19.00*
Other customers also bought
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Bossheads, aluminium, angle 90°
DIN 12895. With thumb screw M8/M10.
Carl Friedrich Usbeck KG
Carl Friedrich Usbeck KG
Swivelling bosshead
Swivelling. To DIN 12895 Part 1. Zinc die casting powder-coated .
Skip product gallery
Bosshead
From
CHF 13.90*
Burette holders
From
CHF 37.20*
Bossheads, zinc die casting, with brass screws
From
CHF 5.80*
Cross bosshead, cast steel
From
CHF 15.70*
Table clamps for rods, malleable cast iron, coated
From
CHF 85.90*
Bossheads, Zinc die casting, with steel screws
From
CHF 5.15*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Similar products
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".