pH electrodes, starter kit, for PrimeLab 2.0
CHF 758.00*
Content:
1
Delivery according to order confirmation
Product number:
4686963
Manufacturer:
Water-i.d. GmbH
Packaging information:
Description
For pH measurements of water solutions in research, environmental monitoring and quality control.
Scope of supply:
pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
- With integrated temperature sensor
- Not refillable
- Automatic recognition of connected electrodes
- Synchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)
- ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0
Scope of supply:
pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
Properties
| Manufacturer Article Number: | PL2SP-ELPHPCATC- |
|---|---|
| Material shaft: | Plastic |
| Max. pH value: | 14 |
| Max. temperature: | 80 °C |
| Min. pH value: | 0 |
| Min. temperature: | 0 °C |
| Temperature: | 0 ... 80 °C |
| Temperature sensor: | NTC 30 kOhm |
| UNSPSC: | 41115604 |
| pH range: | 0 ... 14 |
Skip product gallery
From
CHF 270.00*
From
CHF 59.20*
Accessories
Water-i.d. GmbH
Water-i.d. GmbH
pH electrodes for PrimeLab 2.0
For pH measurements of water solutions in research, environmental monitoring and quality control.Not refillableWith integrated temperature sensorFor connecting to the ProbeBOX 1.0
Water-i.d. GmbH
Water-i.d. GmbH
pH buffer solutions
Disposable bags for effective calibration. Traceability according to NIST.
Skip product gallery
From
CHF 847.00*
Other customers also bought
Water-i.d. GmbH
Water-i.d. GmbH
pH electrodes, starter kit, for PrimeLab 2.0, refillable
For pH measurements of water solutions in research, environmental monitoring and quality control.TRIS buffer compatibleWith integrated temperature sensorAutomatic recognition of connected electrodesSynchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0Scope of supply:pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
CHF 133.40*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
Accessories NANOCOLOR®
From
CHF 19.20*
Spectrophotometer NANOCOLOR® Advance
From
CHF 6,537.40*
Waste Water Set-Up MD 610
From
CHF 5,518.00*
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
*additional cable required**additional mains adapter required
The spectrophotometer NANOCOLOR® Advance, with Reference Detector Technology (RDT), provides precise and reliable measurement and can be used in the entire spectrum of water and wastewater analysis. It can also be used mobile due to its rechargeable battery. With an additional 860 nm LED, the device determines the nephelometric turbidity during each measurement of a tube test and warns of incorrect results.Backlit colored 5" display with touch screenFully automatic cuvette recognition via the integrated 2D barcode scannerEvaluation of NANOCOLOR® tube tests (16 und 24 mm), standard tests (10, 20, 40, 50 mm) and VISOCOLOR® Powder PillowsOver 200 pre-programmed tests and special methods, 99 fully programmable methods, absorbance, transmission, factor, kinetics, 2-point calibration, scan, nephelometric turbidity measurement 1-1000 NTUScope of supply: Spectrophotometer NANOCOLOR® Advance, manual (quick start guide), protective covering, power supply unit with country specific adapters, USB stick, calibration cuvette, certificate, cleaning clothSpecificationsOptical system:Single beam photometer with grating monochromatorWavelength range:340 ... 800 nmWavelength accuracy:± 2 nmWavelength reproducibility:± 0.1 nmSpectral bandwidth: 4 nmPhotometric range:± 3.0 A in the range 340 ... 800 nmScattered light: 0.5 %Light source:Halogen lampData memory:1000 measured values / spectraInterfaces:2 x USB (Host), 1 x USB (Function)Dimensions (W x D x H): 280 x 325 x 130 mmWeigth: 3.8 kgPower supply:110 ... 240 V, 12 V 3A DCProtection class:IP67
Flexible wastewater measuring station with mobile photometer MD 610 and thermoreactor RD 125, complete with reagents for COD measurement and the appropriate accessories. With the MD 610, the measurement results of the wastewater can be called up and evaluated on a smartphone or tablet. The RD 125 thermoreactor is equipped with 24 holes for 16 mm cuvettes.Data transfer via Bluetooth® and AquaLX® appInterference filter for increased reproducibility of the resultsMemory for 500 measurement results120 pre-programmed methodsScope of supply: Photometer MD 610, standard accessories, Thermoreactor RD 125, Cuvette tests: COD (0 ... 150 mg/l, 0 ... 1500 mg/l, ammonium VARIO HR (1 ... 50 mg/l N), nitrate VARIO (1 ... 30 mg/l N), nitrite LR VARIO Powder Pack (0.01 ... 0.3 mg/l N), nitrogen VARIO Total HR (5 ... 150 mg/l N ), phosphate VARIO Total HR (0.02 ... 1 mg/l P / 0.06 ... 3.5 mg/l PO4), cuvette stand, membrane filtration set, operating instructions, warranty declaration