Reagents for Photometer MD 100 Boiler Water/Cooling Water
Product number:
9699332
Manufacturer:
Tintometer GmbH
Packaging information:
Weight:
0.13 kg
Description
| Hazardous Substance Data | |
| GHS | |
| Signal word | Gefahr |
| H-Satz | H290, H314 |
| P-Satz | P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P405 |
| SDS | Link |
Properties
| Description: | Reagent Set Phosphate (5 - 80 mg/l PO4) |
|---|---|
| For: | Boiler water |
| GHS: | GHS05 |
| Manufacturer Article Number: | 56R019090 |
| Package contents: | liquid reagent of 65ml |
Skip product gallery
Tube tests NANOCOLOR® Sulfide / Sulfite / Sulfate
From
CHF 107.20*
Tube tests NANOCOLOR® ortho- and total Phosphate
From
CHF 133.40*
Tube tests NANOCOLOR® COD
From
CHF 114.60*
Accessories NANOCOLOR®
From
CHF 19.20*
Spectrophotometer NANOCOLOR® Advance
From
CHF 6,537.40*
Reagents VARIO for Photometer Lovibond®and HACH®
From
CHF 27.00*
Reference Standard Kit
Price on request
Similar products
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.
A maximum in accuracy and precision is granted for the measurement results due to exactly pre-dosed reagents in 16 mm cuvettes and additional reagents. The tests are pre-programmed in photometers and selected automatically via a barcode on the cuvette. The contact with any dangerous chemicals is avoided because the measurement is performed directly in the test tube. This guarantees maximum safety for the user.DIN ISO 15705
*additional cable required**additional mains adapter required
The spectrophotometer NANOCOLOR® Advance, with Reference Detector Technology (RDT), provides precise and reliable measurement and can be used in the entire spectrum of water and wastewater analysis. It can also be used mobile due to its rechargeable battery. With an additional 860 nm LED, the device determines the nephelometric turbidity during each measurement of a tube test and warns of incorrect results.Backlit colored 5" display with touch screenFully automatic cuvette recognition via the integrated 2D barcode scannerEvaluation of NANOCOLOR® tube tests (16 und 24 mm), standard tests (10, 20, 40, 50 mm) and VISOCOLOR® Powder PillowsOver 200 pre-programmed tests and special methods, 99 fully programmable methods, absorbance, transmission, factor, kinetics, 2-point calibration, scan, nephelometric turbidity measurement 1-1000 NTUScope of supply: Spectrophotometer NANOCOLOR® Advance, manual (quick start guide), protective covering, power supply unit with country specific adapters, USB stick, calibration cuvette, certificate, cleaning clothSpecificationsOptical system:Single beam photometer with grating monochromatorWavelength range:340 ... 800 nmWavelength accuracy:± 2 nmWavelength reproducibility:± 0.1 nmSpectral bandwidth: 4 nmPhotometric range:± 3.0 A in the range 340 ... 800 nmScattered light: 0.5 %Light source:Halogen lampData memory:1000 measured values / spectraInterfaces:2 x USB (Host), 1 x USB (Function)Dimensions (W x D x H): 280 x 325 x 130 mmWeigth: 3.8 kgPower supply:110 ... 240 V, 12 V 3A DCProtection class:IP67
Suitable for Lovibond®Photometers as well as for Photometers of company HACH®**HACH® is a registered trademark of HACH® Company, Loveland, Colorado. Using brand HACH® contains no indication of a connection to this company or to a possible agreement of HACH® Company to composition, examination or suitability for use in spectrophotometers or other equipment or systems, which are sold under the brand HACH®.
The reference standards are designed to check the accuracy and the reliability of the results. The shelf life of reference standards is two years from the date of production, provided that storage and use are in accordance with the instructions provided.Applications: Water Treatment, Waste Water, Cooling/Boiler Water, Pool-Water, Beverage Industry, Laboratory and Field Testing.